445763

Black Decker KS865KN Manual

25
Zoom out
Zoom in
Previous page
1/80
Next page
25
ENGLISH
• Make sure that you remove the blade-changing
spanner from the saw blade locking screw before
you switch on the circular saw.
• Do not switch off the power tool unless the saw
blade is running freely.
When sawing
• Only hold your saw by the handles provided. Do not
hold your saw in a position that could result in a
poor grip and control of the saw.
• Always ensure that there is sufficient clearance
below the material being cut and the bench or
support to allow the safety guard to rotate fully.
• All nails and metal objects must be removed from
the workpiece before you commence sawing.
• Do not attempt to saw extremely small workpieces.
• After switching off, never attempt to stop the
saw blade by pressing against the side of the blade.
• Never put the circular saw down on a table or work
bench unless you have previously switched off.
• Never operate the circular saw with the saw blade
turned upwards or to the side.
Operational protection devices
• Ensure that all devices screening the saw blade are
in perfect working order.
• Never jam the saw guard.
• Free a jammed saw guard immediately and do not
use the saw if the guard is jammed.
• Only use the guard retracting lever provided should
the blade guard need to be moved when
commencing a cut.
• The riving knife must not be removed.
• The riving knife should be correctly set.
Checking and changing the saw blade
• Only saw blades conforming to the specifications
contained in these operating instructions may
be used.
• Saw blades whose main part is thicker or whose
pitch is smaller than the riving knife’s thickness
should not be used.
• Saw blades made of high alloy, high speed steel
(HSS steel) should not be used.
• Only sharp saw blades in perfect working condition
should be used; cracked or bent saw blades should
be discarded and replaced at once.
• Ensure that the saw blade is securely fixed and
turns in the correct direction.
• Metal cutting and stone cutting discs should not be
used with this saw.
Save these instructions!
DOUBLE INSULATION
The tool is double insulated. This means that all
the external metal parts are electrically insulated
from the mains power supply. This is done by
placing insulation barriers between the
electrical and mechanical components making it
unnecessary for the tool to be earthed.
Note: Double insulation does not take the place
of normal safety precautions when operating the
tool. The insulation system is for added protection
against injury resulting from a possible electrical
insulation failure within the tool.
ELECTRICAL SAFETY
Be sure the supply is the same as the voltage given on
the rating plate. The tool is fitted with a two-core cable
and plug.
MAINS PLUG REPLACEMENT (UK ONLY)
Should the mains plug need replacing and you are
competent to do this, proceed as instructed below.
If you are in doubt, contact a Black & Decker service
agent or a qualified electrician.
• Disconnect the plug from the power supply.
• Cut off the plug and dispose of safely. A plug with
bared copper conductors is very dangerous if
engaged in a live socket outlet.
• Only fit BS1363A approved plugs fitted with the
correctly rated fuse.
Note: Fuses do not give personal protection against
electric shock.
• The cable wire colours, or a letter, will be marked at
the connection point of most good quality plugs. Attach
the wires to their respective points in the plug (see
diagram). Brown is L (live) and blue is N (neutral).
Fit a plug
approved
to BS1363A
Connect
blue to
N (neutral)
Make sure that
the outer sheath
of the cable is held
firmly by the clamp
Fit a 5 amp fuse
Connect
brown to
L (live)
230 volts AC
only. Never use
a light socket
N
L
E
• Before replacing the top cover of the plug ensure
that the cable restraint is holding the outer sheath of
Fit a 13 amp fuse
CD600 Circ saw ML p01-41 07/01/2000, 3:43 pm25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS865KN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS865KN in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS865KN

Black Decker KS865KN User Manual - English - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info