581018
8
Zoom out
Zoom in
Previous page
1/100
Next page
8
ENGLISH
Assembly
Warning! Before attempting any of the following operations,
make sure that the tool is switched off and unplugged
and that the saw blade has stopped. Used saw blades
may be hot.
Fitting the saw blade (fig. B)
X Hold the saw blade (11) as shown, with the teeth facing
forward.
X Push and hold the blade clamp (10) down.
X Insert the shank of the saw blade into the blade holder
(12) as far as it will go.
X Release the blade clamp (10).
Saw blade storage (fig. C)
Saw blades (11) can be stored in the storage compartment
located on the side of the tool.
X Open the cover (3) of the saw blade storage
compartment by holding the tab on the top of the cover
(3) and pulling it outward.
X The blades are retained in the compartment by a
magnetic strip. To remove a blade, press down on one
end of the blade to raise the other end, and remove.
X Close the cover (3) of the saw blade storage
compartment and make sure that it is latched closed.
Warning! Close the compartment door securely before
operating the saw.
Connecting a vacuum cleaner to the tool (fig. D)
An adaptor is required to connect a vacuum cleaner or dust
extractor to the tool. The dust extraction adaptor (6) can be
purchased from your local Black & Decker retailer.
X Push the adaptor (6) into the dust extraction outlet (5).
X Connect the vacuum cleaner hose to the adaptor (6).
Use
Adjusting the shoe plate for bevel cuts (fig. E and F)
Warning! Never use the tool when the shoe plate is loose or
removed.
The shoe plate (7) can be set to a left or right bevel angle of
up to 45°.
X Pull the shoe plate locking lever (4) outwards to unlock
the shoe plate (7) from the 0 deg position (fig. F).
X Pull the shoe plate (7) forward and set the required
bevel 15°, 30° and 45° indicated in the bevel angle
window.
X Push the shoe plate locking lever (4) back towards the
saw to lock the shoe plate (7).
To reset the shoe plate (7) for straight cuts:
X Pull the shoe plate locking lever (4) outwards to unlock
the shoe plate (7).
X Set the shoe plate (7) to an angle of 0° and push the
shoe plate backwards.
X Push the shoe plate locking lever (4) back towards the
saw to lock the shoe plate (7).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS850SLW T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS850SLW T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS850SLW T1

Black Decker KS850SLW T1 Quick start guide - English - 16 pages

Black Decker KS850SLW T1 User Manual - Polish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info