581017
9
Zoom out
Zoom in
Previous page
1/100
Next page
9
ENGLISH
How to use the Auto Select
TM
dial (fig. G)
This tool is fitted with a unique Auto Select
TM
Dial (8) to set the speed and the pendulum blade action for various cutting
applications. To select the optimum speed and pendulum blade action for the type of material being cut, turn the dial (8)
as shown in the table below:
Switching on and off
X To switch the tool on, press the on/off switch (2).
X To switch the tool off, release the on/off switch (2).
X For continuous operation, press the lock-on button (1)
and release the on/off switch (2).
X To switch the tool off when in continuous operation,
press the on/off switch (2) and release it.
Sawing
Hold the tool firmly with both hands while cutting.
The shoe plate (7) should be held firmly against the material
being cut. This will help prevent the saw from jumping,
reduce vibration and minimise blade breakage.
X Let the blade run freely for a few seconds before starting
the cut.
X Apply only a gentle pressure to the tool while performing
the cut.
Operating the laser (fig. H - K) (‘L’ units only)
Installing the batteries (fig. H)
Detach the laser module (14) from the jigsaw by removing
the screw (13) and pulling the laser module forward. Insert
two new 1.5 Volt AAA alkaline batteries, making sure to
match the (+) and (-) terminals correctly. Re-attach the laser
module (14).
Adjusting the laser side-to-side (fig. I)
Note: The laser is intended as a cutting aid and does not
guarantee a precise cut.
Warning! Do not adjust the laser with the jigsaw plugged in.
X Use the laser adjustment screw (15) to align the laser line
with the saw blade if needed.
Icon Application Speed Blade Type
Kitchen work surfaces,
work tops, laminate
board
Fast speed General wood
Scrolling/curves/
craftwork, hardwoods,
decking, flooring
Fast speed Scrolling wood
General wood
Plywood and wood
panels
Fast speed General wood
General timber, soft
wood, fast rip cutting
Fast speed General wood
Plastics, Perspex, PVCMedium speed General purpose
Sheet metal tin plate,
ceramic tile, fibreglass
sheet
Low speed Metal or ceramic or
fibreglass blade
Slow speed, precision
start
Slow speed Choose the correct
blade for the
application
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS850SL T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS850SL T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info