581013

Black Decker KS801SE T1 Manual

7
Zoom out
Zoom in
Previous page
1/88
Next page
7
ENGLISH
(Original instructions)
7
ENGLISH
(Original instructions)
Position 0: metal and aluminium and sheet metal (no pendulum action).
Position 1: for laminates, hard wood, work tops.
Position 2: for plywood and PVC/Plastics.
Position 3: for soft wood and fast cutting
To adjust the pendulum action:
Rotate the Pendulum Stroke dial (6) to the required position.
Sawing
Hold the tool rmly with both hands while cutting.
The shoe plate (4) should be held rmly against the material being cut. This will help prevent
Auto Select™ dial ( g. F - KS801SE and KS901SE only)
The KS801SE and KS901SE are tted with a unique Auto Select™ Dial (6) to set the speed and the pendulum action
for various cutting applications.
To select the optimum speed and pendulum action for the type of material being cut, rotate the dial (6) as shown
in the table below:
Icon Speed Pendulum Application
Slow No Straight and curved cuts – sheet metal, tin plate,
ceramic tiles and breglass sheet
PVC
Medium Medium / low Straight and curved cuts – hardwood, decking,
ooring, plastic, pexiglas and PVC
Fast Maxiumum Straight cuts – general lumber and softwood
Fast Medium / low Straight and curved cuts – plywood and wood panels
Fast No Straight and curved cuts – countertops, laminate
boards, scrolling, curves and craftwork
PVC
the saw from jumping, reduce vibration and minimise blade
breakage.
Let the blade run freely for a few seconds before starting
the cut.
Apply only a gentle pressure to the tool while performing
the cut.
Hints for optimum use
Straight Assist Blade
When you require a straight cut with extra precision, use the
straight assist blade. The KS901SE/PE is supplied with this
blade as standard and it can be purchased as an optional
extra for use with the KS801SE (part number X21001-XJ).
Anti-Splinter Guard ( g. G
- KS901SE only
)
To minimise splintering, use the anti-splinter guard supplied
with your product. This reduces the open area between the
shoe and the blade without restricting your view of the cut line.
To t the anti-splinter guard:
Remove the blade (see gure A).
Line up the anti-splinter guard (13) with the shoe plate (4)
from underneath.
Press down onto the shoe plate until the guard clicks in
place.
Replace the blade.
Sawing laminates
When cutting laminates, splintering may occur which can
damage the presentation surface. The most common saw
blades cut on the upward stroke, therefore if the shoe plate is
sitting on the presentation surface either use a saw blade that
cuts on the downward stroke or:
Use a ne-tooth saw blade.
Saw from the back surface of the workpiece.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS801SE T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS801SE T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info