580993
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
Viewing from directly above the jigsaw, the line of cut (16)
can be easily followed. Should this view be restricted for any
reason, the laser can be used as an alternative cutting guide.
XUse a pencil to mark the cutting line (16).
XPosition the jigsaw over the line (16).
XSwitch on the laser.
Operating the work light (fig. K and L) ('W' units only)
Units that include a 'W' in the catalogue number are provided
with an LED light (18) to illuminate the area around the
blade.
XTo switch the work light on, slide the switch (19) to the
on position (I).
XTo switch the work light off, slide the switch (19) to the
off position (0).
Hints for optimum use
Sawing laminates
When cutting laminates, splintering may occur which can
damage the presentation surface. The most common saw
blades cut on the upward stroke, therefore if the shoe plate
is sitting on the presentation surface either use a saw blade
that cuts on the downward stroke or:
XUse a fine-tooth saw blade.
XSaw from the back surface of the workpiece.
XTo minimise splintering, clamp a piece of scrap wood or
hardboard to both sides of the workpiece and saw
through this sandwich.
Sawing metal
Be aware that sawing metal takes much more time than
sawing wood.
XUse a saw blade suitable for sawing metal.
XWhen cutting thin sheet metal, clamp a piece of scrap
wood to the back surface of the workpiece and cut
through this sandwich.
XSpread a film of oil along the intended line of cut.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
XRegularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
XRegularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Never let any liquid get inside the tool and never
immerse any part of the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
XSafely dispose of the old plug.
XConnect the brown lead to the live terminal in the new
plug.
XConnect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS800EL T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS800EL T1 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS800EL T1

Black Decker KS800EL T1 User Manual - English, German, Dutch, Danish, French, Italian - 88 pages

Black Decker KS800EL T1 User Manual - Polish - 16 pages

Black Decker KS800EL T1 User Manual - Portuguese, Swedish, Spanish, Norwegian, Finnish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info