Manual Black Decker KS703PE T1 (page 6 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

580978

Zoom out

Zoom in

1/76

ENGLISH

Features

This tool includes some or all of the following features:

1. On/off switch

2. Lock-on button

3. Dust extraction outlet

4. Shoe plate

5. Saw blade support roller

6. Pendulum stroke selector

Fig. C

7. Saw blade storage compartment (KS702PE & KS703PE)

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and that

the saw blade has stopped. Used saw blades may be hot.

Fittingandremovingthesawblade(g.A)

u Loosen (do not remove) the two screws (11).

u Hold the saw blade (8) with the teeth facing forward.

u Insert the shank of the saw blade (8) into the blade holder

(10) as far as it will go.

u Slightly tighten the two screws (11) alternately to position

the blade, then fully tighten the two screws (11).

u To remove the saw blade (8), turn both screws (11) one

turn counter-clockwise.

Connectingavacuumcleanertothetool(g.B)

An adaptor (12) is required to connect a vacuum cleaner or

dust extractor to the tool. The adaptor can be purchased from

your local Black & Decker retailer.

u Push the adaptor (12) into the dust extraction outlet (3).

u Connect the vacuum cleaner hose (13) to the adaptor (12).

Sawbladestorage(KS702PE&KS703PEonly)(g.C)

Saw blades (8) can be stored in the storage compartment (7)

located on the side of the tool

u Open the cover of the saw blade storage compartment (7)

by holding the tab on the top of the door and pulling outwards.

u Remove or store saw blades (8) in the storage

compartment. (7).

u Close the cover of the saw blade storage compartment (7)

and make sure that it is latched closed.

Cutlineblower(g.D)

u To aid visibility when cutting, your jigsaw is equipped with

a cut line blower (14) which will keep the work area clear

of dust as you saw.

Residual risks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving

parts.

u Injuries caused when changing any parts, blades or

accessories.

u Injuries caused by prolonged use of a tool. When

using any tool for prolonged periods ensure you take

regular breaks.

u Impairment of hearing.

u Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF.)

Use

Adjustingtheshoeplateforbevelcuts(g.E)

The shoe plate (4) can be set to make either a straight cut or a

left or right bevel cut at an angle of 45°.

u Loosen the screws (9).

u Pull the shoe plate (4) forward, rotate the shoe plate (4) to

the left or right and push it back into the 45° location.

u Tighten the screws (9).

To reset the shoe plate for straight cuts:

u Loosen the screws (9).

u Pull the shoe plate (4) forward, rotate to the centre and

push it back into the 0° location.

u Tighten the screws (9).

Setting the pendulum stroke (g. F)

u Set the pendulum stroke selector (6) to the required

position.

- Position 0: metal and aluminium and sheet metal.

- Position I: for laminates, hard wood, work tops.

- Position II: for plywood and PVC/plastics.

- Position III: for soft wood and fast cutting.

Variable speed control

The tool has a variable speed on/off switch (1). The operating

speed depends on how far you press the switch.

u Use a high speed for wood, medium speed for aluminium

and PVC and low speed for metals other than aluminium.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS703PE T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KS703PE T1 Manual

Product: