382820

Black Decker ks 855 n Manual

27
Zoom out
Zoom in
Previous page
1/80
Next page
27
ENGLISH
FEATURES
1. Sawdust outlet
2. Window lever
3. Depth of cut adjustment
4. Guard retracting lever
5. Saw blade locking screw
6. Riving knife
7. Blade guard
8. Parallel fence
9. Window
10. Front handle
11. Carbon brush cover
12. Mitring angle scale
13. Locking screw for mitring adjustment
14. Saw shoe
15. Locking screw for parallel fence
16. Sight guide
17. Mark for straight cut
18. Mark for mitring cut
19. Electronic switch
20. On/off switch
21. Depth of cut scale
22. Secondary locking lever for mitring adjustment
23. Inner washer
24. Outer washer
25. Lock-off button
26. Blade
Your product includes some or all of these features.
SAFETY WARNING
Your saw is designed for use with wood cutting blades
only. Do not use stone cutting or metal cutting discs.
PREPARING YOUR CIRCULAR SAW
SETTING THE DEPTH OF CUT ADJUSTMENT
Proceed as follows:
Disconnect the plug from the electricity supply.
Loosen the depth of cut
adjustment (3) at the
bottom of the scale.
Move your circular saw
up the scale until the
desired depth of cut is
indicated on the scale
(21). Tighten the screw
(3). The depth of cut
should be 3mm greater
than the thickness of the workpiece.
SETTING THE SIGHT GUIDANCE SYSTEM
(NOT CD600/KS227/KS840)
The window and ‘sight guide’ are designed to enable
accurate cutting everytime the saw is used.
To prepare the guide system for first time use,
proceed as follows:
Mark a straight line on
your workpiece to
represent the desired
path of the saw blade.
Whilst viewing through
the saw guard window
align the saw blade teeth
with the intended line of
cut drawn on the
workpiece.
Whilst keeping the saw
in this position, place the
orange ‘sight guide’ (16)
onto the shoe of your
circular saw. Align the
‘sight guide’ with the line
drawn on the workpiece
and secure in place with the screw provided.
• At the start of every cut align the blade as described
and whilst cutting keep the ‘sight guide’ in line with
the intended line of cut drawn on the workpiece.
16
•
21
•
3
•
22
•
KS846N, KS850N, KS855N, KS865E/N/KN, 374456N
CD600, KS227,
KS840
•
•
1
3
4
5
6
7
8
10
12
13
14
15
17+18
•
•
•
•
•
•
•
•
•
•
•
•
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 (17+18)
19
25
20
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CD600 Circ saw ML p01-41 07/01/2000, 3:43 pm27
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ks 855 n at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ks 855 n in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker ks 855 n

Black Decker ks 855 n User Manual - English - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info