382706
6
Zoom out
Zoom in
Previous page
1/76
Next page
6
ENGLISH
Features
This tool includes some or all of the following features:
1. On/off switch
2. Lock-on button
3. Dust extraction outlet
4. Shoe plate
5. Saw blade support roller
6. Pendulum stroke selector
Fig. C
7. Saw blade storage compartment (KS702PE & KS703PE)
Assembly
Warning! Before attempting any of the following operations,
make sure that the tool is switched off and unplugged and that
the saw blade has stopped. Used saw blades may be hot.
Fittingandremovingthesawblade(g.A)
u Loosen (do not remove) the two screws (11).
u Hold the saw blade (8) with the teeth facing forward.
u Insert the shank of the saw blade (8) into the blade holder
(10) as far as it will go.
u Slightly tighten the two screws (11) alternately to position
the blade, then fully tighten the two screws (11).
u To remove the saw blade (8), turn both screws (11) one
turn counter-clockwise.
Connectingavacuumcleanertothetool(g.B)
An adaptor (12) is required to connect a vacuum cleaner or
dust extractor to the tool. The adaptor can be purchased from
your local Black & Decker retailer.
u Push the adaptor (12) into the dust extraction outlet (3).
u Connect the vacuum cleaner hose (13) to the adaptor (12).
Sawbladestorage(KS702PE&KS703PEonly)(g.C)
Saw blades (8) can be stored in the storage compartment (7)
located on the side of the tool
u Open the cover of the saw blade storage compartment (7)
by holding the tab on the top of the door and pulling outwards.
u Remove or store saw blades (8) in the storage
compartment. (7).
u Close the cover of the saw blade storage compartment (7)
and make sure that it is latched closed.
Cutlineblower(g.D)
u To aid visibility when cutting, your jigsaw is equipped with
a cut line blower (14) which will keep the work area clear
of dust as you saw.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
u Injuries caused by touching any rotating/moving
parts.
u Injuries caused when changing any parts, blades or
accessories.
u Injuries caused by prolonged use of a tool. When
using any tool for prolonged periods ensure you take
regular breaks.
u Impairment of hearing.
u Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF.)
Use
Adjustingtheshoeplateforbevelcuts(g.E)
The shoe plate (4) can be set to make either a straight cut or a
left or right bevel cut at an angle of 45°.
u Loosen the screws (9).
u Pull the shoe plate (4) forward, rotate the shoe plate (4) to
the left or right and push it back into the 45° location.
u Tighten the screws (9).
To reset the shoe plate for straight cuts:
u Loosen the screws (9).
u Pull the shoe plate (4) forward, rotate to the centre and
push it back into the 0° location.
u Tighten the screws (9).
Setting the pendulum stroke (g. F)
u Set the pendulum stroke selector (6) to the required
position.
- Position 0: metal and aluminium and sheet metal.
- Position I: for laminates, hard wood, work tops.
- Position II: for plywood and PVC/plastics.
- Position III: for soft wood and fast cutting.
Variable speed control
The tool has a variable speed on/off switch (1). The operating
speed depends on how far you press the switch.
u Use a high speed for wood, medium speed for aluminium
and PVC and low speed for metals other than aluminium.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ks 700 pe sightline at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ks 700 pe sightline in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info