383710
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
Work with the shoe pressed against the workpiece.
Hints for optimum use
As some splintering along the line of cut on the top side
of the workpiece cannot be avoided, cut on the side
where splintering is acceptable.
Where splintering is to be minimised, e.g. when cutting
laminates, clamp a piece of plywood onto the top of the
workpiece.
Using the sight guide (fig. G)
The tool is equipped with a sight guide for straight cutting (27)
and for 45° mitre cutting (28).
Adjust the sight guide as described below.
Align the left edge of the guides (27) or (28) with the
cutting line (29).
Keep the sight guide aligned with the cutting line while
sawing.
Work with the shoe pressed against the workpiece.
Adjusting the sight guide
Make a test cut halfway through a piece of scrap wood.
Withdraw the saw so the cutting line (29) becomes visible.
While keeping the saw in this position, loosen the sight
guide on the saw shoe as shown.
Align the 0° mark (27) on the sight guide with the cutting
line (29). When adjusting for 45° mitre cuts, align the 45°
mark (28) on the sight guide with the cutting line.
Secure the sight guide using the screw (30).
How to use the laser (fig. H)
The laser projects the line of cut on the workpiece surface.
To switch the laser on, press the button (6).
To switch the laser off, press the button (6) again.
Viewing from directly above the saw, the line of cut can be
easily followed. Should this view be restricted for any reason,
the laser can be used as an alternate cutting guide.
Use a pencil to mark the cutting line.
Position the saw over the line.
Switch on the laser.
Dust extraction
An adaptor is required to connect a vacuum cleaner or dust
extractor to the tool.
Insert the dust extraction adaptor into the saw dust outlet
(12).
Connect the vacuum cleaner hose to the adaptor.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Regularly clean the ventilation slots with a clean,
dry paint brush.
To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Replacing the batteries (fig. I)
Open the battery cover (31).
Remove the old batteries.
Place the new batteries as indicated.
Refit the cover.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ks 66 l qs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ks 66 l qs in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info