Manual Black Decker KR450 (page 8 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

16314

Zoom out

Zoom in

1/76

ENGLISH

ASSEMBLY

Before attempting any of the following

operations, make sure that the tool is

switched off and unplugged.

Fitting the side handle (fig. B)

◆ Turn the grip (9) counterclockwise until you can

slide the side handle (5) onto the front of the

tool as shown.

◆ Rotate the side handle into the desired position.

◆ Tighten the side handle by turning the grip

clockwise.

Fitting a drill bit or screwdriver bit

Keyless chuck (fig. C)

◆ Open the chuck by turning the front part (10)

with one hand while holding the rear part (11)

with the other.

◆ Insert the bit shaft (12) into the chuck and

firmly tighten the chuck.

Keyed chuck (fig. D)

◆ Open the chuck by turning the sleeve (13).

◆ Insert the bit shaft (12) into the chuck.

◆ Insert the chuck key (14) into each hole (15) in

the side of the chuck and turn until tight.

Removing and refitting the chuck (fig. E)

◆ Open the chuck as far as possible.

◆ Remove the chuck retaining screw by turning it

clockwise using a screwdriver.

◆ Tighten an Allen key (16) into the chuck and

strike it with a hammer as shown.

◆ Remove the Allen key.

◆ Remove the chuck by turning it counterclockwise.

◆ To refit the chuck, screw it onto the spindle

and secure it with the chuck retaining screw.

USE

◆ Let the tool work at its own pace.

Do not overload.

◆ Before drilling into walls, floors or

ceilings, check for the location of wiring

and pipes.

Selecting the direction of rotation (fig. A)

◆ For drilling and for tightening screws, slide the

forward/reverse switch (7) forward.

◆ For loosening screws or removing a jammed

drill bit, slide the forward/reverse switch (7)

backward.

Never change the direction of rotation

while the motor is running.

Selecting the drilling mode (fig. A)

◆ For drilling in masonry, set the drilling mode

selector (4) to the position.

◆ For drilling in other materials and for

screwdriving, set the drilling mode selector (4)

to the position.

Switching on and off (fig. A)

Variable speed switch

◆ To switch the tool on, press the variable speed

switch (1). The tool speed depends on how far

you press the switch. As a general rule, use low

speeds for large diameter drill bits and high

speeds for smaller diameter drill bits.

◆ For continuous operation, press the lock-on

button (2) and release the variable speed switch.

This option is available only at full speed.

◆ To switch the tool off, release the variable

speed switch. To switch the tool off when in

continuous operation, press the variable speed

switch once more and release it.

On/off switch

◆ To switch the tool on, press the on/off switch (1).

If the tool has a two-speed selector (3), set it to

the required speed range. As a general rule,

use low speeds for large diameter drill bits and

high speeds for smaller diameter drill bits.

◆ For continuous operation, press the lock-on

button (2) and release the on/off switch.

◆ To switch the tool off, release the on/off

switch. To switch the tool off when in

continuous operation, press the on/off switch

once more and release it.

KR450 matkap motoru var mi? Varsa bilgi verebilir misiniz? Tesekkürler. necatiyazir@hotmail.com Submitted on 17-7-2021 at 21:14
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KR450 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KR450

Black Decker KR450 User Manual - English - 76 pages

Black Decker KR450 User Manual - English - 16 pages

Black Decker KR450 User Manual - German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KR450 Manual

Product: