497038
46
Zoom out
Zoom in
Previous page
1/92
Next page
46
ESPAÑOL
Encendido y apagado (fig. J)
Para encender el aparato, deslice el interruptor
on/off (1) hacia adelante.
Para apagar la herramienta, pulse la parte
trasera del interruptor on/off.
Consejos para un uso óptimo
Sujete firmemente la herramienta con una
mano alrededor del mango lateral y con la otra
alrededor de la carcasa del motor (fig. K).
Cuando esté esmerilando, mantenga siempre
un ángulo de 15º aproximadamente entre el
disco y la superficie de la pieza de trabajo (fig. L).
MANTENIMIENTO
Su herramienta Black & Decker está diseñada para
funcionar durante un largo período de tiempo con
un mantenimiento mínimo. El funcionamiento
satisfactorio continuado depende de un cuidado
apropiado y una limpieza periódica de la
herramienta.
Antes de realizar cualquier tipo de
mantenimiento, apague y desenchufe la
herramienta.
Limpie periódicamente las ranuras de
ventilación de la herramienta con un cepillo
suave o con un paño seco.
Limpie periódicamente la carcasa del motor
con un paño húmedo. No utilice ninguna
sustancia limpiadora abrasiva o que contenga
disolventes.
HERRAMIENTAS DESECHADAS
Y EL MEDIO AMBIENTE
Si llega el momento en que cree que debe
reemplazar su herramienta, o no la piensa
utilizar más, piense en la protección del
medio ambiente. Los servicios postventa
Black & Decker aceptarán sus
herramientas viejas Black & Decker y se
desharán de ellas de la forma menos
perjudicial para el medio ambiente.
Características técnicas
KG68 KG70
Voltaje V
AC
230 230
Potencia absorbida W 680 700
Velocidad sin carga min
-1
10.000 10.000
Diámetro del disco mm 115 100
Diámetro interior del disco mm 22 16
Dimensión del husillo M14 M10
Peso kg 2,3 2,2
KG75 CD500
Voltaje V
AC
230 230
Potencia absorbida W 750 680
Velocidad sin carga min
-1
10.000 10.000
Diámetro del disco mm 115 115
Diámetro interior del disco mm 22 22
Dimensión del husillo M14 M14
Peso kg 2,4 2,3
GARANTÍA
Si durante el periodo de 12 meses posterior a su
adquisición su producto Black & Decker
presentara defectos de materiales o mano de
obra, el fabricante garantiza su reparación gratuíta
o su sustitución por uno nuevo, a nuestro criterio,
siempre que:
El producto se envíe a un centro de servicio
Black & Decker con prueba de su fecha de
compra.
El producto haya sido adquirido por el proprio
usuario y no para alquilarlo.
El producto haya sido correctamente utilizado
y tratado con cuidado.
No se haya intentado repararlo por personal
distinto al de los centros de servicio
autorizados.
NUESTRA POLÍTICA DE GARANTÍA
Las averías debido a lo siguiente no están
cubiertas por la garantía:
Recambio de cuchillas viejas o dañadas o
cables rotos al usar o almacenar. Éstas se
consideran piezas de recambio que se gastan
durante el uso normal.
Averías debidas a impactos, golpes o
maltratos manifiestos.
SAG.P65 17-07-2001, 14:5246
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KG70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KG70 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info