390499

Black Decker kg 90 Manual

22
Zoom out
Zoom in
Previous page
1/64
Next page
22
ENGLISH
disc you can use is 115mm (KG65/KG72) and 125mm
(KG90). The maximum thickness is 6mm and the centre
hole is 22mm.
Cutting metal
Use a cutting disc for cutting rod, pipe and metal
section. The maximum diameter you can use is 115mm
(KG65/KG72) and 125mm (KG90). The maximum
thickness is 3.5mm and the centre hole is 22mm.
Cutting masonry
Use a flat cutting disc. The maximum diameter you can
use is 115mm (KG65/KG72) and 125mm (KG90). Always
approach the work at the angle at which you will cut.
Maintain this angle throughout the cut and do not exert
a side load on the disc.
Proceed as follows:
Disconnect the plug from the electricity supply.
Ensure the guard
is fitted.
Place the inner
flange (a) on the
spindle. Ensure it
is located on the
two flats.
Place the
abrasive disc on
the spindle and
inner flange (a).
Ensure it is
correctly located.
Fit the threaded
outer flange (b),
making sure it is
facing in the
correct direction
for the type of
disc fitted. For
grinding discs, the
flange (b) is fitted
with the raised
portion facing
towards the disc. For cutting discs, the flange (b) is
fitted with the inner portion facing away from the disc.
Hold the spanner
on the flats of the
spindle to prevent
rotation of the
disc and tighten
the outer flange
with the spanner
provided.
KG72/KG90 only:
Press in the
spindle lock
button and rotate
the spindle until it
locks. Keeping the
lock button
pressed in,
tighten the outer
flange with the
spanner provided.
REMOVING THE GUARD (SANDING ONLY)
Disconnect the plug from the electricity supply.
Remove the disc.
Remove the
clamp bolt and
the three
retaining screws.
FITTING ABRASIVE DISCS
Use an abrasive disc with the backing pad for sanding
with your angle grinder.
Disconnect the plug from the electricity supply.
Remove the
guard. Place the
flange on the
spindle. Place the
backing pad on
the spindle and
inner flange,
ensuring it is
correctly located.
Mount the fibre
backed abrasive
a
b
a
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker kg 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker kg 90 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info