387033

Black Decker kd 664 re Manual

22
Zoom out
Zoom in
Previous page
1/64
Next page
22
ENGLISH
This guarantee is offered as an extra benefit and is
additional to the customers statutory rights.
AFTER SALES SERVICE FOR THE BLACK & DECKER
PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY)
Black & Decker offers a nationwide after sales service
through our company operated service centres and
concessionaries on the Channel Islands and Isle of Man.
It is our aim to offer excellent service, fast repairs,
extensive parts availability and full accessory support.
The use of other than genuine Black & Decker
accessories and parts may damage or reduce the
performance of your Black & Decker product and may
also endanger the user. The terms and conditions of
the warranty may also be effected.
THE AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should be
totally satisfied with their Black & Decker product and
after sales service, but if help or advice is needed
please contact the local Black & Decker service centre
manager who will be happy to help. Full details of our
unique after sales service can be obtained from any of
our Black & Decker service centres.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
TECHNICAL DATA
The level of sound pressure of the tool is in accordance
with EEC legislation. It is recommended that you take
appropriate measures for the protection of your hearing
if the sound level seems uncomfortable. This normally
equates to a sound pressure in excess of 85dB (A).
Note: This user manual also covers catalogue numbers
ending with a letter suffix. Refer to your carton for
details of your product.
FEATURES
1. On/off switch
2. Speed control
3. Lock-on button
4. Side handle
5. Chuck jaws
6. Chuck
7. Hammer/drill switch
8. Forward/reverse switch
Your drill includes some or all of these features:
• The on/off switch is used to operate your drill in all
modes of operation.
• The variable speed control provides optimal control
of your drill for a wide range of tasks.
• On two-speed drills, the speed switch permits
selection of the appropriate drilling speed.
• The lock-on button provides continuous operation
of your drill.
• The side handle (where provided) gives a secondary
gripping position for your drill.
• Your drill can operate as a hammer drill or as a
rotary drill depending on the setting of the hammer/
drill switch.
• The forward/reverse switch controls the direction of
rotation when your drill is used as a screwdriver, or
when clearing a jammed drill bit.
FITTING THE DRILL BIT (KEYLESS CHUCKS)
Proceed as follows:
Disconnect the plug from the electricity supply.
While holding the
rear section of
the chuck, rotate
the front section
until the jaws of
the chuck are
sufficiently open.
Insert the drill bit
in the jaws of the chuck. Hold the rear section of the
chuck while tightening the front section. Twist the two
sections firmly in opposite directions to securely grip
the drill bit.
2/8
7
6
5
4
1
3
•
•
•
•
•
•
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker kd 664 re at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker kd 664 re in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info