387053
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
ENGLISH
the speed switch or the forward/reverse when your
drill is operating.
USING YOUR DRILL
To switch your
drill on, depress
the on/off switch.
Your drill stops
when the on/off
switch is released.
If continuous
operation is
required, depress
the lock-on
button while the
on/off switch is
depressed.
To stop your drill
when operation is
continuous, depress
the on/off switch
again and release. While your drill is in operation, do
not touch the chuck.
HANDY HINTS
Fit the correct size and type of drill or screwdriver bit.
Set the correct drill speed.
Always hold your drill using the handle and the
side handle.
Always hold your drill at right-angles to your work.
When drilling
wood and metal,
set the hammer
switch to the drill
mode .
When drilling
masonry, set the
hammer switch
to the hammer mode . When screwdriving, set the
hammer switch to the drill mode .
Set the forward/reverse switch to the correct direction.
Never change the direction of rotation when your
drill is in operation.
After use, remove the drill bit and gently tap the side
of the chuck with a soft-faced hammer to remove
the dust. This will extend the life of the chuck.
COOLING DOWN
If your drill becomes too hot in use, set the speed
control to its highest setting and allow your drill to
operate without load for 2 minutes.
OVERLOAD
Never use excessive force when using your drill. Too
much pressure can reduce the speed of your drill and
reduce its efficiency. This can result in an overload
which can cause damage to the motor of your drill.
EC DECLARATION OF CONFORMITY
We declare that units: KD350RE, KD351RE, KD352,
KD353, KD354E, KD355RE, KD355CRE, KD356CRE,
KD455CRE conform to 89/392/EEC, 89/336/EEC, EN55014,
73/23/EEC, EN55104, EN50144
A weighted sound pressure 100dB (A)
A weighted sound power 113dB (A)
Hand/arm weighted vibration 8.7m/s
2
Brian Cooke - Director of Engineering
Black & Decker Ltd, Spennymoor, County Durham
DL16 6JG United Kingdom
The Black & Decker policy is one of continuous
improvement to our product and as such we reserve
the right to change the product specification without
prior notice.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker kd 353 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker kd 353 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker kd 353

Black Decker kd 353 User Manual - German - 44 pages

Black Decker kd 353 User Manual - Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info