472998

Black Decker KC9652 Manual

28
Zoom out
Zoom in
Previous page
1/72
Next page
28
ENGLISH
TECHNICAL DATA
The level of sound pressure of the tool is in accordance
with EEC legislation. It is recommended that you take
appropriate measures for the protection of your hearing
if the sound level seems uncomfortable. This normally
equates to a sound pressure in excess of 85dB (A).
Note: This user manual also covers catalogue numbers
ending with a letter suffix. Refer to your carton for
details of your product.
FEATURES
1. Forward/reverse and lock-off switch
2. Variable speed trigger switch
3. Battery pack
4. 3-5 hour charger
5. 1 hour fast charger
6. Keyless chuck
7. Torque adjustment collar
8. Gear ratio selector
9. Screwdriver bit
The forward/reverse and
lock-off switch controls
the direction of rotation
of the chuck. In the
centre position, it
prevents starting of your
drill when changing
accessories or during
storage.
• The variable speed trigger switch is used to operate
your drill in all modes of operation. It also controls
the speed of your drill.
• The torque adjustment collar sets the torque loading
when screwdriving.
• The gear ratio selector enables the setting of the best
speed for screwdriving, or the best speed for drilling.
• Your drill is supplied with a double function
screwdriver bit. To remove, pull firmly from the recess.
To replace, push firmly until it clicks into place.
VARIABLE SPEED
Your drill has a variable
speed trigger switch.
The more the trigger
switch is depressed, the
higher the speed of your
drill. If your drill has a
gear ratio selector, the
change in speed is controlled continuously using the
trigger switch or in two stages using the gear ratio
selector. The maximum speed achieved using the
trigger switch depends on the gear ratio selector setting.
BRAKE
The brake switch stops the rotation of the chuck in less
than 1 second. This feature is useful when adjusting
the seating of screws, and for driving quickly a large
number of screws.
GEAR RATIO SELECTOR
To change the setting of the gear ratio selector,
proceed as follows:
To select the low speed
setting (screwdriving
and high torque
applications), slide the
selector switch to the
front position. The
number ‘1’ appears.
To select the high speed
setting (drilling and hammer drilling), slide the selector
switch to the rear position. The number ‘2’ appears. If
necessary, when changing the gear ratio, depress the
trigger switch sufficiently to rotate the chuck slowly.
Warning! Do not change gear when the chuck is
rotating at other than low speed.
TORQUE ADJUSTMENT COLLAR
To select non-masonry drilling, rotate the collar until
the drill symbol is in line with the indicator on the top of
your drill housing.
2
3
4
5
1
2
1
2
3
4
5
9
8
7
6
2
3
5
1
4
•
•
•
•
•
•
•
•
•
1
2
3
4
5
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KC9652 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KC9652 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info