21819
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Hold the tool with the sanding base facing upwards.
Place the sanding sheet (12) onto the sanding base,
making sure that the holes in the sheet line up with the
holes in the base.
The diamond-shaped tip (11) can be reversed and replaced
when worn.
When the front part of the tip is worn, detach it from the
sheet, reverse it and press it onto the sanding base again.
When the whole tip is worn, remove it from the sanding
base and fit a new tip.
The polishing foam and pads (13) can be fitted the same
way as the sanding sheets.
Tip of the sanding base (fig. C)
When the sanding base tip (6) or tip holder (5) is worn, it can
be reversed or replaced. Spare parts are available from your
Black & Decker dealer.
Remove the screw (9).
Reverse or replace the worn part.
Fit and tighten the screw.
Finger attachment (fig. D)
The finger attachment is used for fine detail sanding.
Remove the screw (9).
Remove the diamond-shaped tip holder (5) from the
sanding base.
Fit the finger attachment (7) onto the sanding base.
Fit and tighten the screw.
Fit the appropiate sanding sheet (14) onto the finger
attachment.
Profile attachment (fig. E)
The profile attachment is used for contour sanding.
Remove the screw (9).
Remove the diamond-shaped tip holder (5) from the
sanding base.
Fit the profile attachment (8) onto the sanding base.
Fit and tighten the screw.
Fitting and removing a sanding profile (fig. F1 & F2)
Choose the sanding profile most suitable for your application.
Place one end of the sanding profile (10) into the recess at
the front end of the profile holder (8).
Push the other end of the sanding profile until it clicks
into place.
To remove the sanding profile, push it forward and pull
the rear end out of the profile holder (fig. F2).
Fitting a sanding sheet onto a sanding profile (fig. G)
Align the sanding sheet (15) with the sanding profile (10).
Press the sanding sheet onto the sanding profile, making
sure that the sanding sheet follows the shape of the profile.
Connecting a vacuum cleaner (fig. H)
The tool has an adaptor to connect it to a vacuum cleaner
when sanding wood. To connect the tool to a vacuum cleaner,
proceed as follows:
Fit the dust extraction connector (3) onto the adapter at
the back of the tool.
Connect the hose of a suitable vacuum cleaner to the
connector.
Use
Warning! Let the tool work at its own pace. Do not overload.
Warning! Do not cover the ventilation slots when using the
tool. Hold the tool as shown in fig. I. Make sure that the
sanding base is flat on the workpiece.
Switching on and off
To switch the tool on, set the on/off switch (1) to position I.
To switch the tool off, set the on/off switch to position O.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you will
get the very best from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Clear the cooling vents and slots with a clean, dry paint
brush.
Clean the housing with a clean, damp cloth. Do not use
solvents.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Black & Decker provides a facility for recycling
Black & Decker products once they have reached the
end of their working life. This service is provided
free of charge.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KA165GT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KA165GT in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KA165GT

Black Decker KA165GT User Manual - German, French, Portuguese, Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info