390219
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
ENGLISH
Labels on tool
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Electrical safety
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Features
1. On/off switch
2. Lock-on button
3. Variable speed control knob
4. Adjustable handle
5. Tension lever
6. Retractable hood
7. Centring knob
8. Dust extraction outlet
Assembly
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Fittingasandingbelt(g.A)
Warning! Never use the tool without a sanding belt.
u Pull the tension lever (5) outward to release the tension on
the sanding belt (9).
u Remove the old sanding belt.
u Place a new sanding belt over the rollers. Ensure that the
arrow on the sanding belt points in the same direction as
the arrow on the tool.
u Push the tension lever (5) inward to tension the sanding belt.
Adjustingthesandingbelttracking(g.B)
To ensure a correct tracking, the sanding belt must be centred
over the rollers.
u Switch on the tool while holding it upside down.
u Turn the centring knob (7) as required until the tracking of
the belt is centred over the rollers.
Adjustingthehandle(g.C)
The handle is adjustable to 3 positions.
u Unlock the handle (4) by pulling the locking handle (10)
outward.
u Adjust the handle in the desired position.
u Lock the handle by pushing the locking handle inward.
Retractingthehood(g.D)
The hood can be retracted for sanding in conned spaces.
Warning! The hood can only be retracted when the adjustable
handle is in the up position.
u Adjust the handle (4) in the straight-up position.
u Lift the hood (6) up.
u To close the hood, pull the tab (11) sideways rst.
Fittingandremovingthedustcassette(g.E)
u Slide the dust cassette (12) over the dust extraction outlet (8).
u To remove the dust cassette, slide it off the outlet.
Connectingavacuumcleaner(g.F)
u Slide the adaptor (13) over the dust extraction outlet (8).
u Connect the hose of the vacuum cleaner to the adaptor.
Use
Warning! Let the tool work at its own pace. Do not overload.
Variable speed control
The variable speed control allows you to adapt the speed of
the tool to the workpiece material.
u Set the control knob (3) to the desired setting. Use a high
speed for wood, medium speed for veneer and synthetics
and low speed for acrylic glass, non-ferrous metals and for
removing paints.
Switching on and off
u To switch the tool on, press the on/off switch (1).
u For continuous operation, press the lock-on button (2) and
release the on/off switch.
u To switch the tool off, release the on/off switch. To switch
the tool off when in continuous operation, press the on/off
switch once more and release it.
Emptyingthedustcassette(g.E&G)
The dust cassette should be emptied every 10 minutes of use.
u Remove the dust cassette (12) to the rear and off the tool.
u Remove the cover (14) by twisting it clockwise.
u Hold dust cassette with the lter (15) facing down and
shake the cassette to empty the contents. Shake the
cover to empty the contents.
u Ret the cover (14) onto the dust cassette, twisting it
counterclockwise until it locks into place.
u Ret the dust cassette onto the tool.
Cleaningthedustcassettelter
The dust cassette lter is re-usable and should be cleaned
regularly.
u Empty the dust cassette (12) as described above.
u Pull the lter (15) off the dust cassette.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ka 89 ek at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ka 89 ek in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info