78488
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
ENGLISH
g. Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from those intended could result
in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional safety instructions for sanders
Always wear a dust mask whenever sanding.
Thoroughly remove all dust after sanding.
Take special care when sanding paint which is possibly
lead based or when sanding some woods and metal
which may produce toxic dust:
- Wear a dust mask specifically designed for protection
against lead paint dust and fumes and ensure that persons
within or entering the work area are also protected.
- Do not let children or pregnant women enter the work
area.
- Do not eat, drink or smoke in the work area.
- Dispose of dust particles and any other debris safely.
Before using the tool on wooden workpieces, make sure
to fit the dust cassette.
Before using the tool on metal workpieces, make sure to
remove the dust cassette.
Never use the tool without a sanding sheet.
Never use the tool without a sanding base.
This appliance is not intended for use by young or infirm
persons without supervision. Children must be supervised
to ensure they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Electrical safety
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
Features
This tool includes some or all of the following features.
1. On/off switch
2. Gel comfort grip (KA270GT(K) only)
3. Dust cassette
4. Large detail sanding base
5. Tip holder
6. Sanding base tip
Fig. A
7. Random orbit sanding base
8. Profile attachment (KA270(GT)K only)
9. Sanding profiles (KA270(GT)K only)
10. Detail finger attachment (KA270(GT)K only)
11. Spare sanding base tip (KA270(GT)K only)
12. Louvre attachment (KA270LDK only)
Assembly
Warning! Before assembly, make sure that the tool is switched
off and unplugged.
Random orbit sanding base
With this sanding base, you can use the tool as a random orbit
sander.
Fitting and removing the sanding base (fig. B)
Place the sanding base (7) onto the spindle (13).
Place the washer (14) onto the spindle.
Insert the Allen screw (15) into the screw hole in the spindle.
Tighten the Allen screw using the Allen key (16) supplied.
To remove the sanding base, remove the Allen screw (15)
and washer (14).
Fitting sanding sheets (fig. C)
Hold the tool with the sanding base (7) facing upwards.
Place the sanding sheet (17) onto the sanding base (7).
The holes in the sheet do not need to line up with the
holes in the base.
Large detail sanding base
With this sanding base, you can use the tool as a detail
sander or an orbital sander.
Fitting and removing the sanding base (fig. D & E)
For detail sanding, the pointed end should face forward as in
fig. D. For sanding large areas, the pointed end should face to
the back as in fig. E.
Place the sanding base (4) onto the spindle (13). Make
sure that the legs of the base locate into the tool.
Place the washer (14) onto the spindle.
Insert the Allen screw (15) into the screw hole in the spindle.
Tighten the Allen screw using the Allen key (16) supplied.
To remove the sanding base, remove the Allen screw (15)
and washer (14).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KA 270 GT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KA 270 GT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info