Manual Black Decker ka 220 e (page 27 of 84) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

389548

Zoom out

Zoom in

1/84

ENGLISH

OPERATING YOUR MULTI SANDER

To switch your multi

sander on, press the

on/off switch on the

side marked “I”.

To switch your multi

sander off, press the

on/off switch on the

side marked “O”.

Before plugging your multi-sander in, make sure it is

switched off.

VARIABLE SPEED CONTROL (KA210E/KA220E/KA230E)

The variable speed

control gives the best

operating performance

for each material. As a

general rule, use low

speed for polishing and

for sanding acrylic/

synthetic materials,

and high speed for

wood and metal.

Material Variable speed setting

Hardwood (beech) 4-5

Softwood (pine) 4-5

Veneer wood 3-5

Synthetic materials 3-4

Acrylic sheet 1-3

Non-ferrous metals 4-5

Steel 4-5

Lacquer and paint removal 4-5

Polishing 1-3

Rust removal 4-5

USING YOUR MULTI SANDER AS A RANDOM ORBITAL

SANDER (KA200/KA220/KA220E/KA230E)

With the round base

fitted, you can use your

multi sander as a

random orbital sander.

This gives a circular/

orbital movement,

combined with a

rotational movement;

thus giving improved stock removal and reduced risk of

swirl marks.

FITTING THE ROUND BASE

Disconnect the plug from the electricity supply.

Position the round base

on the spindle.

Position the washer on

the spindle and fit the

screw. Hold the base

and tighten the screw

with the allen key

provided. The base will

wear after some time.

Replacements are

available as an accessory.

FITTING THE SANDPAPER (ROUND BASE)

Disconnect the plug from the electricity supply.

Hold your multi sander

with the base upwards.

Press the sandpaper

disc onto the base,

making sure the base is

completely covered.

It is not necessary to

align the holes in the

paper and the base.

Never use your multi

sander without a sandpaper disc.

USING YOUR MULTI SANDER IN THE ORBITAL MODE

(KA210/KA210E/KA220/KA220E/KA230E)

Detail sanding

Use your multisander with the point of the base

pointing forwards. This position permits you to sand

into difficult or confined areas.

Orbital sanding

Use your multi-sander with the point of the base to the

rear. This permits you to sand large areas with areas

and corners that have easy access.

FITTING THE POINTED BASE

Proceed as follows:

Disconnect the plug from the electricity supply.

Position the pointed

base on the spindle,

making sure the legs of

the base fit into their

housings. The base will

wear after some time.

Replacements are

available as an

accessory. Place the

washer in position on the base and fit the screw using

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ka 220 e in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker ka 220 e Manual

Product: