Manual Black Decker ka 168 k mouse (page 8 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

389446

Zoom out

Zoom in

1/88

ENGLISH

Item Description

120gritprolesandingsheet.

For a medium nish for prole sanding.

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingsandingsheets(g.A&B)

u Detach the two diamond-shaped tips (11) from the sanding

sheet (12).

u Hold the tool with the sanding base facing upwards.

u Place the sanding sheet (12) onto the sanding base,

making sure that the holes in the sheet line up with the

holes in the base.

The diamond-shaped tip (11) can be reversed and replaced

when worn.

u When the front part of the tip is worn, detach it from the

sheet, reverse it and press it onto the sanding base again.

u When the whole tip is worn, remove it from the sanding

base and t a new tip.

u The polishing foam and pads (13) can be tted the same

way as the sanding sheets.

Tipofthesandingbase(g.C)

When the sanding base tip (6) or tip holder (5) is worn, it can

be reversed or replaced. Spare parts are available from your

Black & Decker dealer.

u Remove the screw (9).

u Reverse or replace the worn part.

u Fit and tighten the screw.

Fingerattachment(g.D)

The nger attachment is used for ne detail sanding.

u Remove the screw (9).

u Remove the diamond-shaped tip holder (5) from the

sanding base.

u Fit the nger attachment (7) onto the sanding base.

u Fit and tighten the screw.

u Fit the appropriate sanding sheet (14) onto the nger

attachment.

Proleattachment(g.E)

The prole attachment is used for contour sanding.

u Remove the screw (9).

u Remove the diamond-shaped tip holder (5) from the

sanding base.

u Fit the prole attachment (8) onto the sanding base.

u Fit and tighten the screw.

Fittingandremovingasandingprole(g.F1&F2)

u Choose the sanding prole most suitable for your application.

u Place one end of the sanding prole (10) into the recess at

the front end of the prole holder (8).

u Push the other end of the sanding prole until it clicks into

place.

u To remove the sanding prole, push it forward and pull the

rear end out of the prole holder (g. F2).

Fittingasandingsheetontoasandingprole(g.G)

u Align the sanding sheet (15) with the sanding prole (10).

u Press the sanding sheet onto the sanding prole, making

sure that the sanding sheet follows the shape of the prole.

Connectingavacuumcleaner(g.H)

The tool has an adaptor to connect it to a vacuum cleaner

when sanding wood. To connect the tool to a vacuum cleaner,

proceed as follows:

u Fit the dust extraction connector (3) onto the adapter at

the back of the tool.

u Connect the hose of a suitable vacuum cleaner to the

connector.

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Do not cover the ventilation slots when using the

tool. Hold the tool as shown in g. I. Make sure that the

sanding base is at on the workpiece.

Switching on and off

u Hold the tool off the workpiece.

u To switch the tool on, set the on/off switch (1) to position I.

u A single red light will ash. Wait until the red light turns to

green. This means the tool is ready to use.

u To switch the tool off, set the on/off switch to position O.

Note: Repeat the procedure above each time the tool is

switched on to optimise results of the feature. Failure to follow

the proper procedure may result in the settings not working as

intended.

Usingtheautopressureindicator(g.J1-J4)

This tool is tted with an auto pressure indicator (2),

which lights up when you are applying the correct amount of

pressure to achieve optimal sanding results:

J1 Single red light ashes when the tool is switched on.

Once the red light turns green the tool is ready to use.

J2 Single green light indicates the tool is ready to use.

This setting can be used for delicate and contour sanding.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ka 168 k mouse in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 8,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker ka 168 k mouse Manual

Product: