390071

Black Decker ka 1000 Manual

8
Zoom out
Zoom in
Previous page
1/84
Next page
8
ENGLISH
Item Description
120gritprolesandingsheet.
For a medium nish for prole sanding.
Assembly
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Fittingsandingsheets(g.A&B)
u Detach the two additional diamond-shaped tips (10) from
the sanding sheet (11).
u Hold the tool with the sanding base facing upwards.
u Place the sanding sheet (11) onto the sanding base,
making sure that the holes in the sheet line up with the
holes in the base.
The diamond-shaped tip (10) can be reversed and replaced
when worn.
u When the front part of the tip is worn, detach it from the
sheet, reverse it and press it onto the sanding base again.
u When the whole tip is worn, remove it from the sanding
base and t a new tip.
u The polishing foam and pads (12) can be tted the same
way as the sanding sheets.
For optimal dust collection, ensure the correct type of sanding
paper is used.
Tipofthesandingbase(g.C)
When the sanding base tip (5) or tip holder (4) is worn, it can
be reversed or replaced. Spare parts are available from your
Black & Decker dealer.
u Remove the screw (8).
u Reverse or replace the worn part.
u Fit and tighten the screw.
Fingerattachment(g.D)
The nger attachment is used for ne detail sanding.
u Remove the screw (8).
u Remove the diamond-shaped tip holder (4) from the
sanding base.
u Fit the nger attachment (6) onto the sanding base.
u Fit and tighten the screw.
u Fit the appropriate sanding sheet onto the nger
attachment.
Proleattachment(g.E)
The prole attachment is used for contour sanding.
u Remove the screw (8).
u Remove the diamond-shaped tip holder (4) from the
sanding base.
u Fit the prole attachment (7) onto the sanding base.
u Fit and tighten the screw.
Fittingandremovingasandingprole(g.F1&F2)
u Choose the sanding prole most suitable for your
application.
u Place one end of the sanding prole (9) into the recess at
the front end of the prole holder (7).
u Push the other end of the sanding prole until it clicks into
place.
u To remove the sanding prole, push it forward and pull the
rear end out of the prole holder (g. F2).
Fittingasandingsheetontoasandingprole(g.G)
u Align the sanding sheet with the sanding prole (9).
u Press the sanding sheet onto the sanding prole, making
sure that the sanding sheet follows the shape of the prole.
Fittingandremovingthedustcassette(g.H)
u Slide the dust cassette (2) onto the tool and make sure
that it is securely located.
u To remove the dust casette, pull it to the rear and off the
tool.
Use
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off
u To switch the tool on, set the on/off switch (1) to position I.
u To switch the tool off, set the on/off switch to position O.
Emptyingthedustcassette(g.H)
The dust cassette should be emptied every 10 minutes of use.
u While holding the tool, pull the dust cassette (2) to the rear
and off the tool.
u Remove the cassette door (13).
u Shake the door (13) and dust cassette (2) to empty the
contents.
u Ret the door (13) and dust cassette (2) onto the tool.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you will
get the very best from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ka 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ka 1000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info