472988
76
Zoom out
Zoom in
Previous page
1/104
Next page
1
HP126FSC
HP126F2K
HP128F2K
HP146F2K
HP148F2K
HP188F2K
2
English 7
Deutsch 15
Français 23
Italiano 31
Nederlands 39
Español 47
Português 55
Svenska 63
Norsk 70
Dansk 77
Suomi 85
EÏÏËÓÈη 92
Copy
3
A
9
7
5 6
13 12
3
4
8
2 1
11
10
4
CB
D
10 9
15
16
17
194 18
19
20
21
5
FE
H
G
11
13 12
9
23
2
3
24
6
I
5
7
ENGLISH
CORDLESS DRILL/SCREWDRIVER
HP126FSC/HP126F2K/HP128F2K/
HP146F2K/148F2K/HP188F2K
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
EC DECLARATION OF CONFORMITY
HP126FSC/HP126F2K/HP128F2BT/
HP146F2K/HP148F2K/HP188F2K
Black & Decker declares that these tools
conform to: 98/37/EC, 89/336/EEC,
73/23/EEC, EN 50260, EN 55014,
EN 60335, EN 61000
Level of sound pressure, measured according to
EN 50260:
HP126FSC HP126F2K HP128F2K
L
pA
(sound pressure) dB(A) 70 70 81
L
WA
(acoustic power) dB(A) 83 83 94
HP146F2K HP148F2K HP188F2K
L
pA
(sound pressure) dB(A) 81 81 86.5
L
WA
(acoustic power) dB(A) 94 94 99.5
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Hand/arm weighted vibration value according to
EN 50260:
HP126FSC HP126F2K HP128F2K
< 2.5 m/s
2
< 2.5 m/s
2
5.6 m/s
2
HP146F2K HP148F2K HP188F2K
< 2.5 m/s
2
5.6 m/s
2
7.3 m/s
2
Colin Wills
Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
INTENDED USE
Your Black & Decker drill/screwdriver HP126F2/
HP146F2 has been designed for screwdriving
applications and for drilling in wood, metal and
plastics.
Your Black & Decker drill/screwdriver HP148F2/
HP188F2 has been designed for screwdriving
applications and for drilling in wood, metal,
plastics and soft masonry. This tool is intended for
consumer use only. Your Black & Decker charger
has been designed for charging Black & Decker
batteries of the type supplied with this tool.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Fire hazard.
8
ENGLISH
Know your tool
Warning! When using battery-powered
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
leaking batteries, personal injury and
material damage.
Read all of this manual carefully before
operating the tool.
Before operating the tool, make sure
that you know how to switch the tool off
in an emergency.
Retain this manual for future reference.
General
1. Keep work area clean
Cluttered areas and benches can cause
accidents.
2. Consider work area environment
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit. Do not use the tool where there is
a risk of causing fire or explosion, e.g. in the
presence of flammable liquids and gases.
3. Keep children away
Do not allow children, visitors or animals to
come near the work area or to touch the tool.
4. Dress properly
Do not wear loose clothing or jewellery, as
these can be caught in moving parts.
Preferably wear rubber gloves and non-slip
footwear when working outdoors.
Wear protective hair covering to keep long hair
out of the way.
5. Personal protection
Always use safety glasses. Use a face or dust
mask whenever the operations may produce
dust or flying particles. Wear ear protection
whenever the sound level seems
uncomfortable.
6. Do not overreach
Keep proper footing and balance at all times.
7. Stay alert
Watch what you are doing. Use common
sense. Do not operate the tool when you are
tired.
8. Secure workpiece
Use clamps or a vice to hold the workpiece.
It is safer and it frees both hands to operate
the tool.
9. Connect dust extraction equipment
If devices are provided for the connection of
dust extraction and collection facilities, ensure
that these are connected and properly used.
10.Remove keys and adjusting wrenches
Always check that keys and adjusting wrenches
are removed from the tool before operating
the tool.
11.Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which
it was intended. Do not force the tool.
Warning! The use of any accessory or attachment
or performance of any operation with this tool
other than those recommended in this instruction
manual may present a risk of personal injury.
12.Check for damaged parts
Before use, carefully check the tool for
damage. Check for misalignment and seizure
of moving parts, breakage of parts, damage to
guards and switches and any other conditions
that may affect its operation. Ensure that the
tool will operate properly and perform its
intended function. Do not use the tool if any
part is damaged or defective. Do not use the
tool if the switch does not turn it on and off.
Have any damaged or defective parts repaired
or replaced by an authorised repair agent.
Never attempt any repairs yourself.
13.Remove the battery
Where the design permits, remove the battery
when the tool is not in use, before changing
any parts of the tool, accessories or
attachments and before servicing.
14.Avoid unintentional starting
Do not carry the tool with a finger on the on/
off switch. Be sure that the tool is switched off
when inserting the battery into the tool.
15.Do not abuse cord
Never carry the charger by its cord or pull it to
disconnect from the socket. Keep the cord
away from heat, oil and sharp edges.
9
ENGLISH
16.Store idle tools
When not in use, tools, batteries and chargers
should be stored in a dry, locked up or high
place, out of reach of children.
17.Maintain tools with care
Keep cutting tools sharp and clean for better
and safer performance.
Follow the instructions for maintenance and
changing accessories. Keep handles and
switches dry, clean and free from oil and grease.
18.Repairs
This tool complies with relevant safety
requirements. Repairs should only be carried
out by qualified persons using original spare
parts; otherwise this may result in considerable
danger to the user.
Additional safety instructions for batteries and
chargers
Batteries
Never attempt to open for any reason.
Do not expose to water.
Do not store in locations where the
temperature may exceed 40 °C.
Charge only at ambient temperatures between
4 °C and 40 °C.
Charge only using the charger provided with
the tool (see technical data).
Before charging, make sure that the battery is
dry and clean.
Use only the correct type of battery for the tool
(see technical data).
When disposing of batteries, follow the
instructions given in the section “Protecting
the environment”.
Under extreme conditions, battery leakage
may occur. When you notice liquid on the
battery, proceed as follows:
- Carefully wipe the liquid off using a cloth.
Avoid skin contact.
- In case of skin or eye contact, follow the
instructions below.
The battery fluid, a 25-30% solution of
potassium hydroxide, can be harmful.
In case of skin contact, immediately rinse
with water.
Neutralise with a mild acid such as lemon
juice or vinegar. In case of eye contact,
rinse abundantly with clean water for at
least 10 minutes. Consult a physician.
Fire hazard! Avoid short-circuiting the
contacts of a detached battery (e.g. when
storing the battery in a toolbox).
Do not incinerate the battery.
Do not attempt to charge damaged
batteries.
Chargers
Use your Black & Decker charger only to
charge batteries of the type supplied with your
tool. Other batteries could burst, causing
personal injury and damage.
Never attempt to charge non-rechargeable
batteries.
Have defective cords replaced immediately.
Do not expose to water.
Do not open the charger.
Do not probe the charger.
The charger is intended for indoor use only.
Additional safety instructions for drill/screwdrivers
Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Avoid touching the tip of a drill bit just after
drilling, as it may be hot.
ELECTRICAL SAFETY
Your charger has been designed for a specific
mains voltage. Always check that the mains voltage
corresponds to the voltage on the rating plate.
Your charger is double insulated in
accordance with EN 60335; therefore no
earth wire is required.
10
ENGLISH
Mains plug replacement (U.K. & Ireland only)
Should your mains plug need replacing and
you are competent to do this, proceed as
instructed below. If you are in doubt,
contact an authorised repair agent or a
qualified electrician.
Disconnect the plug from the supply and
remove the fuse from the plug.
Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
Only fit 13 Amperes BS1363A approved plugs
fitted with a 5 A fuse (1).
The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their
respective points in the plug (see above).
Brown is for Live (L) (2), blue is for Neutral (N) (4).
Before replacing the top cover of the mains
plug ensure that the cable restraint (3) is
holding the outer sheath of the cable firmly
and that the leads are correctly fixed at the
terminal screws.
If the plug has a fuse cover, make sure that the
fuse cover is fitted. Do not use the plug if the
fuse cover is missing or damaged.
Never use a light socket.
OVERVIEW (fig. A)
1. Variable speed switch
2. Forward/reverse slider
3. Mode selector / torque adjustment collar
4. Chuck
5. Two-gear selector
6. Battery charge indicator
(HP128F2/HP148F2/HP188F2)
7. Bit holder
8. Side handle (HP188F2)
9. Battery
10. Battery release button
11. Charger
12. Charging indicator
13. End of charge indicator
ASSEMBLY
Fitting and removing the battery (fig. B)
To fit the battery (9), line it up with the
receptacle on the tool. Slide the battery into
the receptacle and push until the battery snaps
into place.
To remove the battery, push the release
button (10) while at the same time pulling the
battery out of the receptacle.
Fitting and removing a drill bit or screwdriver
bit (fig. A & C)
This tool is fitted with a keyless chuck to allow for
an easy exchange of bits.
Lock the tool by setting the forward/reverse
slider (2) to the centre position (fig. A).
Open the chuck by turning the front part (15)
with one hand while holding the rear part (16)
with the other (fig. C).
Insert the bit shaft (17) into the chuck.
Firmly tighten the chuck by turning the front
part (15) with one hand while holding the rear
part (16) with the other.
This tool is supplied with a double-ended
screwdriver bit in the bit holder (7) (fig. A).
To remove the screwdriver bit from the bit
holder, lift the bit from the recess.
To store the screwdriver bit, firmly push it into
the holder.
HP126F2/HP146F2 - Removing and fitting the
chuck (fig. D)
The chuck on these models can be easily removed
and refitted. When your project entails both
drilling and screwdriving, fit a screwriver bit in the
spindle and a drill bit in the chuck: you will then
only need to remove the chuck for screwdriving
and refit it for drilling. The screwdriver bit can be
left in the spindle while drilling. You can also fit
drill bits with a hexagonal shaft in this way.
11
ENGLISH
To remove the chuck (4), keep the release tabs
(18) depressed and pull the chuck off the
spindle (19).
Install a screwdriver bit (20) by pushing it into
the spindle (19) as shown. To remove the
screwdriver bit, pull the ring (21) back and pull
the screwdriver bit out of the spindle.
To refit the chuck, push it onto the spindle
until it is firmly locked into place.
Always make sure that the chuck is
securely fitted.
HP188F2 - Fitting the side handle (fig. A)
Loosen the side handle (8) by turning it
counterclockwise.
Slide the side handle over the chuck and onto
the housing.
Tighten the side handle by turning it clockwise.
USE
Let the tool work at its own pace.
Do not overload.
Charging the battery (fig. E)
The battery needs to be charged before first use
and whenever it fails to produce sufficient power
on jobs that were easily done before.
A new battery, or a battery that has not been used
for an extended period of time, achieves full
performance only after approx. 5 charging and
discharging cycles. The battery may become warm
while charging; this is normal and does not
indicate a problem.
Do not charge the battery at ambient
temperatures below 4 °C or above 40 °C.
Recommended charging temperature:
approx. 24 °C.
After normal use, a charging time of 60 minutes
will provide sufficient power for most applications.
However, further charging for up to 90 minutes
could significantly increase the use time,
depending on the battery and charging
conditions.
To charge the battery (9), remove it from the
tool and insert it into the charger (11).
The battery will only fit into the charger in one
way. Do not force. Be sure that the battery is
fully seated in the charger.
Plug in the charger.
Check if the red charging indicator (12) lights
up. If the green end of charge indicator (13)
lights up now instead, the battery is too hot
and cannot be charged. If this happens,
remove the battery from the charger, let the
battery cool down for approx. 1 hour and
re-insert it.
After approx. 1 hour of charging, the red charging
indicator (12) will stop lighting and the green end
of charge indicator (13) will light up. The battery is
now fully charged.
Remove the battery from the charger.
HP128F2/HP148F2/HP188F2 - Checking the
battery condition (fig. F)
This tool is fitted with a battery charge indicator,
which allows you to check the condition of the
battery.
Press and hold down the button (22).
Check to see how many of the lights (23) are on:
Battery charge
1 light low
2 lights medium
3 lights high
Selecting the direction of rotation (fig. G)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or
removing a jammed drill bit, use reverse
(counterclockwise) rotation.
To select forward rotation, push the forward/
reverse slider (2) to the left.
To select reverse rotation, push the forward/
reverse slider to the right.
To lock the tool, set the forward/reverse slider
into the centre position.
Selecting the operating mode or torque (fig.H)
This tool is fitted with a collar to select the operating
mode and to set the torque for tightening screws.
12
ENGLISH
Large screws and hard workpiece materials require a
higher torque setting than small screws and soft
workpiece materials. The collar has a wide range of
settings to suit your application.
For drilling in wood, metal and plastics, set the
collar (3) to the drilling position by aligning the
symbol
with the marking (24).
HP148F2/HP188F2:
For drilling in masonry, set the collar (3) to the
hammer drilling position by aligning the
symbol with the marking (24).
For screwdriving, set the collar to the desired
setting. If you do not yet know the appropriate
setting, proceed as follows:
Set the collar (3) to the lowest torque setting.
Tighten the first screw.
If the clutch ratchets before the desired
result is achieved, increase the collar setting
and continue tightening the screw.
Repeat until you reach the correct setting.
Use this setting for the remaining screws.
Two-gear selector (fig. I)
For drilling in steel and for screwdriving
applications, slide the two-gear selector (5)
towards the front of the tool (1st gear).
For drilling in materials other than steel, slide
the two-gear selector (5) towards the rear of
the tool (2nd gear).
Drilling/screwdriving (fig. A)
Select forward or reverse rotation using the
forward/reverse slider (2).
To switch the tool on, press the switch (1).
The tool speed depends on how far you press
the switch.
To switch the tool off, release the switch.
Hints for optimum use
Drilling
Always apply a light pressure in a straight line
with the drill bit.
Just before the drill tip breaks through the
other side of the workpiece, decrease pressure
on the tool.
Use a block of wood to back up workpieces
that may splinter.
Use spade bits when drilling large diameter
holes in wood.
Use HSS drill bits when drilling in metal.
Use masonry bits when drilling in soft masonry.
Use a lubricant when drilling metals other than
cast iron and brass.
Make an indentation using a centre punch at
the centre of the hole to be drilled in order to
improve accuracy.
Screwdriving
Always use the correct type and size of
screwdriver bit.
If screws are difficult to tighten, try applying a
small amount of washing liquid or soap as a
lubricant.
Always hold the tool and screwdriver bit in a
straight line with the screw.
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning.
Your charger does not require any maintenance
apart from regular cleaning.
Before performing any maintenance on
the tool, remove the battery from the tool.
Unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool
and charger using a soft brush or dry cloth.
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
Regularly open the chuck and tap it to remove
any dust from the interior.
13
ENGLISH
PROTECTING THE ENVIRONMENT
Tools
Should you find one day that your tool
needs replacement, or if it is of no further
use to you, think of the protection of the
environment. Black & Decker repair agents
will accept old Black & Decker tools and
ensure that they are disposed of in an
environmentally safe way.
Batteries
Cd
Black & Decker batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our
environment:
Run the battery down completely, then remove
it from the tool.
NiCd and NiMH batteries are recyclable.
Take them to your service agent or a local
recycling station. Collected batteries will be
recycled or disposed of properly.
Guarantee
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in
no way prejudices your statutory rights.
The guarantee is valid within the territories of the
Member States of the European Union and the
European Free Trade Area.
If a Black & Decker product becomes defective
due to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker guarantees to replace
defective parts, repair products subjected to fair
wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
Technical data
HP126FSC HP126F2K HP128F2K
Voltage V
DC
12 12 12
No-load speed min
-1
0-400/0-1,200 0-400/0-1,200 0-400/0-1,200
Max. torque Nm 20.2 20.2 20.2
Chuck capacity mm 10 10 10
Max. drilling capacity in steel/wood/masonry mm 10/25/- 10/25/- 10/25/12
Battery cat. no. A12F A1712 A1712
Capacity Ah 1.5 1.7 1.7
Weight (without battery) kg 1.3 1.3 1.2
HP146F2K HP148F2K HP188F2K
Voltage V
DC
14.4 14.4 18
No-load speed min
-1
0-300/0-1,100 0-300/0-1,100 0-500/0-1,600
Max. torque Nm 22.1 22.1 29.4
Chuck capacity mm 10 13 13
Max. drilling capacity in steel/wood/masonry mm 10/30/- 13/30/12 13/35/15
Battery service no. A1714 A1714 A1718
Capacity Ah 1.7 1.7 1.7
Weight (without battery) kg 1.3 1.4 1.4
Charger
Input voltage V
AC
230
Approx. charging time hr 1
14
ENGLISH
The product has been used for trade,
professional or hire purposes;
The product has been subjected to misuse or
neglect;
The product has sustained damage through
foreign objects, substances or accidents;
Repairs have been attempted by persons other
than authorised repair agents or Black & Decker
service staff.
To claim on the guarantee, you will need to
submit proof of purchase to the seller or an
authorised repair agent. You can check the
location of your nearest authorised repair agent by
contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a
list of authorised Black & Decker repair agents and
full details of our after-sales service and contacts
are available on the Internet at: www.2helpU.com
Please visit our website
www.blackanddecker.co.uk to register your new
Black & Decker product and to be kept up to date
on new products and special offers.
Further information on the Black & Decker brand
and our range of products is available at
www.blackanddecker.co.uk
15
DEUTSCH
AKKU-BOHRSCHRAUBER
HP126FSC/HP126F2K/HP128F2K/
HP146F2K/HP148F2K/HP188F2K
HERZLICHEN GLÜCKWUNSCH!
Sie haben sich für ein Gerät von Black & Decker
entschieden. Wir möchten Qualitätsgeräte zu
einem erschwinglichen Preis bieten. Wir hoffen,
daß Sie dieses Gerät viele Jahre mit Freude
verwenden werden.
EU-KONFORMITÄTSERKLÄRUNG
HP126FSC/HP126F2K/HP128F2K/
HP146F2K/HP148F2K/HP188F2K
Black & Decker erklärt hiermit, daß diese
Geräte entsprechend folgenden
Richtlinien und Normen konzipiert wurden:
98/37/EWG, 89/336/EWG, 73/23/EWG,
EN 50260, EN 55014, EN 60335, EN 61000
Höhe des Schalldrucks, gemessen nach EN 50260:
HP126FSC HP126F2K HP128F2K
L
pA
(Schalldruck) dB(A) 70 70 81
L
WA
(Schalleistung) dB(A) 83 83 94
HP146F2K HP148F2K HP188F2K
L
pA
(Schalldruck) dB(A) 81 81 86,5
L
WA
(Schalleistung) dB(A) 94 94 99,5
Tragen Sie bei einem Schalldruck über
85 dB(A) einen Gehörschutz.
Gewichteter Effektivwert der Beschleunigung nach
EN 50260:
HP126FSC HP126F2K HP128F2K
< 2,5 m/s
2
< 2,5 m/s
2
5,6 m/s
2
HP146F2K HP148F2K HP188F2K
< 2,5 m/s
2
5,6 m/s
2
7,3 m/s
2
Colin Wills,
Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
BESTIMMUNGSGEMÄSSE VERWENDUNG
Ihr Black & Decker Bohrschrauber HP126F2/
HP146F2 wurde für Schraubaufgaben sowie für
das Bohren in Holz, Metall und Kunststoff konstruiert.
Ihr Black & Decker Bohrschrauber HP148F2/
HP188F2 wurde für Schraubaufgaben sowie für
das Bohren in Holz, Metall, Kunststoff und weiches
Mauerwerk konstruiert.
Dieses Gerät ist nicht für den gewerblichen Einsatz
vorgesehen.
Ihr Black & Decker Ladegerät wurde zum Laden
von Black & Decker Akkus vom im Lieferumfang
enthaltenen Typ entwickelt.
SICHERHEITSHINWEISE
Warnsymbole
Folgende Warnsymbole werden in dieser
Anleitung verwendet:
Verletzungsgefahr, Lebensgefahr oder
mögliche Beschädigung des Geräts
infolge der Nichtbeachtung der
Anweisungen dieser Anleitung!
Gefahr eines elektrischen Schlages.
16
DEUTSCH
Lesen Sie vor der Inbetriebnahme die
Anleitung.
Feuergefahr.
Kennen Sie Ihr Gerät
Warnung! Bei der Verwendung von
Akkugeräten sind zum Schutz gegen
Feuergefahr, gegen Austreten der
Akkuflüssigkeit sowie gegen Körper-
und Sachschaden grundlegende
Sicherheitsmaßnahmen, einschließlich
der folgenden Vorschriften, zu beachten.
Lesen Sie diese Anleitung gründlich
durch, bevor Sie das Gerät verwenden.
Informieren Sie sich vor der
Inbetriebnahme, wie Sie das Gerät im
Notfall ausschalten.
Bewahren Sie diese Anleitung auf.
Allgemeines
1. Halten Sie Ihren Arbeitsbereich in Ordnung!
Unordnung im Arbeitsbereich führt zu
Unfallgefahren.
2. Berücksichtigen Sie Umgebungseinflüsse!
Setzen Sie das Gerät keinem Regen aus.
Verwenden Sie das Gerät nicht in einer
feuchten oder nassen Umgebung. Sorgen Sie
für eine gute Beleuchtung des
Arbeitsbereiches. Benutzen Sie das Gerät nicht
an Orten, wo Feuergefahr oder
Explosionsgefahr besteht, z.B. in der Nähe von
brennbaren Flüssigkeiten oder Gasen.
3. Halten Sie Kinder fern!
Halten Sie Kinder, Besucher und Tiere dem
Arbeitsbereich fern und sorgen Sie dafür,
daß Sie das Gerät nicht berühren.
4. Tragen Sie geeignete Arbeitskleidung!
Tragen Sie keine weite Kleidung oder
Schmuck, da diese von sich bewegenden
Teilen erfaßt werden können. Beim Arbeiten
im Freien sind Arbeitshandschuhe und
rutschfestes Schuhwerk empfehlenswert.
Tragen Sie bei langen Haaren ein Haarnetz.
5. Schutzmaßnahmen
Verwenden Sie immer eine Schutzbrille.
Tragen Sie eine Atemschutzmaske, falls die
Arbeiten Staub oder Späne erzeugen können.
Tragen Sie bei einem hohen oder
unangenehmen Schallpegel immer einen
Gehörschutz.
6. Achten Sie auf einen sicheren Stand!
Achten Sie auf einen sicheren Stand, um in jeder
Arbeitsposition das Gleichgewicht zu halten.
7. Seien Sie stets aufmerksam!
Konzentrieren Sie sich auf Ihre Arbeit.
Gehen Sie vernünftig vor. Verwenden Sie das
Gerät nicht, wenn Sie müde sind.
8. Sichern Sie das Werkstück!
Benutzen Sie Spannvorrichtungen oder einen
Schraubstock, um das Werkstück festzuhalten.
Es ist damit sicherer gehalten und ermöglicht
die Bedienung des Gerätes mit beiden Händen.
9. Schließen Sie Vorrichtungen zur
Staubabsaugung an!
Falls Vorrichtungen zur Absaugung oder zum
Sammeln von Staub an das Gerät
angeschlossen werden können, vergewissern
Sie sich, daß diese angeschlossen sind und
ordnungsgemäß verwendet werden.
10.Lassen Sie keine Schlüssel stecken!
Überprüfen Sie vor dem Einschalten, ob die
Schlüssel und Einstellwerkzeuge entfernt sind.
11.Benutzen Sie das richtige Gerät!
Die bestimmungsgemäße Verwendung ist in
dieser Betriebsanleitung beschrieben.
Verwenden Sie keine zu schwachen Geräte
oder Zubehörteile für schwere Arbeiten.
Mit dem richtigen Gerät erzielen Sie eine
optimale Qualität und gewährleisten Ihre
persönliche Sicherheit. Überlasten Sie das
Gerät nicht.
Warnung! Das Verwenden anderer als der in
dieser Anleitung empfohlenen Vorsatzgeräte
und Zubehörteile oder die Ausführung von
Arbeiten mit diesem Gerät, die nicht der
bestimmungsgemäßen Verwendung
entsprechen, kann zu Unfallgefahren führen.
12. Kontrollieren Sie Ihr Gerät auf Beschädigungen!
Überprüfen Sie das Gerät vor der Arbeit auf
Beschädigungen.
17
DEUTSCH
Überprüfen Sie, ob alle beweglichen Teile richtig
montiert sind, ob keine Teile gebrochen sind, ob
keine Schutzvorrichtungen und Schalter
beschädigt sind, und ob irgendwelche andere
Schäden den einwandfreien Betrieb des
Gerätes beeinträchtigen könnten. Vergewissern
Sie sich, daß das Gerät ordnungsgemäß
funktionieren wird. Benutzen Sie das Gerät
nicht, wenn irgendein Teil defekt ist. Verwenden
Sie das Gerät nicht, wenn der Ein-/Aus-Schalter
nicht funktioniert. Lassen Sie defekte Teile immer
von einer unserer Kundendienstwerkstätten
reparieren oder austauschen. Versuchen Sie
nie, das Gerät selber zu reparieren.
13.Entfernen Sie den Akku:
Entfernen Sie, falls möglich, den Akku, wenn
Sie das Gerät nicht benutzen, bevor Sie
irgendwelche Werkzeuge, Zubehörteile oder
Geräteteile auswechseln und bevor Sie
irgendwelche Wartungsarbeiten vornehmen.
14.Vermeiden Sie ein unbeabsichtigtes
Einschalten!
Tragen Sie das Gerät nicht mit dem Finger am
Ein-/Aus-Schalter. Vergewissern Sie sich, daß
das Gerät ausgeschaltet ist, wenn Sie den Akku
anbringen.
15.Behandeln Sie das Kabel sorgfältig!
Tragen Sie das Ladegerät nicht am Kabel und
benutzen Sie das Kabel nicht, um den Stecker
aus der Steckdose zu ziehen. Schützen Sie das
Kabel vor Hitze, Öl und scharfen Kanten.
16.Bewahren Sie Ihre Geräte sicher auf!
Unbenutzte Geräte, Ladegeräte und Akkus
sind an einem trockenen, für Kinder nicht
erreichbaren Ort aufzubewahren.
17.Pflegen Sie Ihre Geräte mit Sorgfalt!
Halten Sie Schneidwerkzeuge scharf und
sauber, um gut und sicher arbeiten zu können.
Befolgen Sie die Wartungsvorschriften und die
Hinweise für den Werkzeugwechsel. Halten Sie
Handgriffe und Schalter trocken, sauber und
frei von Öl und Fett.
18.Reparaturen:
Dieses Gerät entspricht den einschlägigen
Sicherheitsvorschriften. Reparaturen sind nur
von autorisierten Fachkräften und mit Original-
Ersatzteilen vorzunehmen; andernfalls kann
Unfallgefahr für den Betreiber entstehen.
Zusätzliche Sicherheitshinweise für Akkus und
Ladegeräte
Akkus
Versuchen Sie auf keinen Fall, einen Akku zu
öffnen.
Setzen Sie den Akku keiner Nässe aus.
Lagern Sie den Akku nicht an einem Ort,
wo die Temperatur 40 °C erreichen kann.
Laden Sie den Akku nur bei einer
Umgebungstemperatur zwischen 4 °C und 40 °C.
Laden Sie den Akku nur mit dem im
Lieferumfang enthaltenen Ladegerät
(siehe technische Daten).
Vergewissern Sie sich vor dem Laden, daß der
Akku trocken und sauber ist.
Verwenden Sie den korrekten Akkutyp für das
jeweilige Gerät (siehe technische Daten).
Befolgen Sie bei der Entsorgung von Akkus die
Anweisungen im Abschnitt “Umweltschutz”.
Unter extremen Einsatzbedingungen kann
Akkuflüssigkeit aus dem Akku austreten.
Wenn sich Flüssigkeit auf dem Akku befindet,
gehen Sie folgendermaßen vor:
- Wischen Sie die Flüssigkeit mit Hilfe eines
Tuches vorsichtig vom Akku. Vermeiden Sie
eine Berührung mit der Haut.
- Falls die Flüssigkeit doch mit der Haut oder
den Augen in Berührung kommen sollte,
befolgen Sie die folgenden Hinweise.
Die Akkuflüssigkeit, eine 25 bis 30% starke
Kaliumhydroxidlösung, kann schädlich
sein. Falls die Lösung mit der Haut in
Berührung kommt, spülen Sie sofort mit
reichlich Wasser. Neutralisieren Sie die
Lösung mit einer milden Säure wie
Zitronensaft oder Essig. Falls die Lösung
mit den Augen in Berührung kommt,
spülen Sie mindestens 10 Minuten lang
mit reichlich klarem Wasser. Wenden Sie
sich an einen Arzt.
Feuergefahr! Vermeiden Sie, daß
Metallteile die Anschlüsse eines nicht am
Gerät befindlichen Akkus kurzschließen
(z.B. Schlüssel, die zusammen mit dem
Akku in einer Tasche getragen werden).
18
DEUTSCH
Verbrennen Sie den Akku nicht!
Versuchen Sie nie, einen beschädigten
Akku zu laden!
Ladegeräte
Verwenden Sie Ihr Black & Decker Ladegerät
nur zum Laden von Akkus vom im
Lieferumfang enthalten Typ. Andere Akkus
könnten platzen und Sach- und
Personenschäden verursachen.
Versuchen Sie nie, nichtwiederaufladbare
Batterien zu laden.
Lassen Sie ein beschädigtes Kabel sofort
austauschen.
Setzen Sie das Ladegerät keiner Nässe aus.
Öffnen Sie das Ladegerät nicht.
Fassen Sie nicht mit den Fingern oder
irgendwelchen Gegenständen in das Ladegerät.
Nicht für die Verwendung im Freien
zugelassen!
Zusätzliche Sicherheitshinweise für Bohrschrauber
Informieren Sie sich vor dem Bohren in
Wänden, Böden und Decken über den
genauen Verlauf von Leitungen und Röhren.
Vermeiden Sie eine Berührung der Spitze eines
Bohrers kurz nach dem Bohren, da sie heiß
sein kann.
ELEKTRISCHE SICHERHEIT
Überprüfen Sie, ob die Netzspannung der auf dem
Typenschild des Ladegerätes angegebenen
Spannung entspricht.
Ihr Ladegerät ist gemäß EN 60335
doppelt isoliert; eine Erdleitung ist somit
nicht erforderlich.
CH Bei Ersatz des Netzkabels achten Sie auf
Verwendung des Schweizer Netzsteckers:
Typ 11 für Geräte Klasse II
(Doppelisolierung)
Verlängerungskabel
Falls ein Verlängerungskabel erforderlich ist,
verwenden Sie ein zugelassenes Verlängerungskabel,
das für die Leistungsaufnahme des Ladegerätes
ausreichend ist (vgl. Typenschild).
Der Mindestquerschnitt beträgt 1 mm
2
. Rollen Sie
das Kabel bei Verwendung einer Kabelrolle immer
völlig aus.
GERÄTEBESCHREIBUNG (Abb. A)
1. Drehzahl-Regelschalter
2. Linkslauf-/Rechtslauf-Umschalter
3. Betriebsart-Wahlschalter/Drehmoment-Einstellring
4. Bohrfutter
5. Zweigang-Wahlschalter
6. Batterieladeanzeige
(HP128F2/HP148F2/HP188F2)
7. Schrauberklingenhalter
8. Seitenhandgriff (HP188F2)
9. Akku
10. Akku-Löseknopf
11. Ladegerät
12. Ladeanzeige
13. Statusanzeige
MONTAGE
Anbringen und Entfernen des Akkus (Abb. B)
Um den Akku (9) anzubringen, richten Sie ihn
mit der Aufnahme am Werkzeug aus. Schieben
Sie den Akku in die Aufnahme und drücken
Sie, bis er einrastet.
Um den Akku zu entfernen, drücken Sie den
Löseknopf (10) und ziehen Sie gleichzeitig den
Akku aus der Aufnahme heraus.
Anbringen und Entfernen eines Bohrers oder
einer Schrauberklinge (Abb. A & C)
Dieses Werkzeug ist mit einem
Schnellspannbohrfutter versehen, das ein leichtes
und schnelles Austauschen von Bohrern und
Schrauberklingen ermöglicht.
Verriegeln Sie das Gerät, indem Sie den
Linkslauf-/Rechtslauf-Umschalter (2) in die
mittlere Stellung schieben (Abb. A).
76
NORSK
MILJØ
Verktøy
Når verktøyet ditt er utslitt, beskytt naturen
ved ikke å kaste det sammen med vanlig
avfall. Lever det til en oppsamlingsplass
som finnes i din kommune eller der hvor
du kjøpte verktøyet.
Batterier
Cd
Black & Decker batteriene kan lades
mange ganger. Beskytt miljøet ved å
levere kasserte batterier til en
oppsamlingsplass beregnet for dette.
Lad ut batteriene helt og ta de så ut av
verktøyet.
NiCd og NiMH batterier er gjennvinningsbare.
Lever de til innkjøpsstedet eller din lokale
gjennvinningsstasjon. Innleverte batterier
gjennvinnes eller sendes til et egnet
behandlingsanlegg.
Reservdeler / reparasjoner
Reservdeler kan kjøpes hos autoriserte
Black & Decker serviceverksteder, som også gir
kostnadsoverslag og reparerer våre produkter.
Oversikt over våre autoriserte serviceverksteder
finnes på Internet, vår hjemmeside
www.blackanddecker.no samt www.2helpU.com
Garanti
Black & Decker garanterer at produktet ikke har
material- og/eller fabrikasjonsfeil ved levering til
kunde. Garantien er i tillegg til kundens lovlige
rettigheter og påvirker ikke disse. Garantien
gjelder innen medlemsstatene i den Europeiske
Unionen og i det Europeiske Frihandelsområdet.
Hvis et Black & Decker produkt går i stykker på
grunn av material- og/eller fabrikasjonsfeil eller har
mangler i forhold til spesifikasjonene, innen
24 måneder fra kjøpet, påtar Black & Decker seg å
reparere eller bytte ut produktet med minst mulig
vanskelighet for kunden.
Garantien gjelder ikke for feil som kommer av:
normal slittasje
feilaktig bruk eller vedlikehold (mislighold)
at produktet har blitt skadet av fremmede
gjenstander, emner eller ved et uhell
Det gjøres oppmerksom på at produktet ikke er
beregnet på industriell/profesjonell/yrkesmessig
bruk, men til hus- og hjemmebruk.
Garantien gjelder ikke om reparasjoner har blitt
utført av noen andre enn et autorisert
Black & Decker serviceverksted.
For å ta garantien i bruk skal produktet og
kjøpekvittering leveres til forhandleren eller til et
autorisert serviceverksted senest 2 måneder etter
at feilen har blitt oppdaget. For informasjon om
nærmeste autoriserte serviceverksted; kontakt det
lokale Black & Decker kontoret på den adressen
som er angitt i bruksanvisningen. En oversikt over
alle autoriserte serviceverksteder samt servicevilkår
finnes også tilgjengelig på Internet, adresse:
www.2helpU.com
Vennligst stikk innom våre nettsider på
www.blackanddecker.no for å registrere ditt nye
Black & Decker-produkt og for å holde deg
oppdatert om nye produkter og spesialtilbud.
Du finner mer informasjon om Black & Decker og
produktutvalget vårt på www.blackanddecker.no
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker HP146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker HP146 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info