Manual Black Decker GX530 (page 4 of 64) (English, German, Dutch, French, Italian, Portuguese, Spanish, Spanish)

474473

Zoom out

Zoom in

1/64

Warning! The use of an RCD or other circuit

breaker unit does not release the operator of

your mower from the safety instructions and

safe working practices given in this manual.

Handle assembly (Fig. B)

The handles of your mower have been fully

assembled prior to delivery, but two minor

operations are required in order to make your

mower ready for use. They are as follows:

Wing nut reversal

• The assemblies (8, 9 & 10) which fix the

upper handle (7) to the lower (6) have

been assembled as shown in Fig. B1 to

protect them during transit.

• We advise you to dismantle these items

(Fig. B2) and re-assemble (Fig. B3),

taking care not to trap the motor cable

(12) between the handles in the process.

This operation will assist in grassbox

removal/refit.

Unfolding the upper handle

The upper handle (7) can now be unfolded

into the position shown in Fig. A, and the

wing nuts (8, 9 &10) tightened firmly, taking

care not to trap the motor cable (12) in the

process.

Grassbox assembly (Fig. C)

• The grassbox (3 & 4) can now be

withdrawn through the handle tube (6),

and the grassbox door can be opened

as indicated by the arrow.

• To refit the box, reverse the process

using the arrow heads (shown in inset) to

re-align the box into its correct position.

Finished mower check

Check your fully assembled mower now for any signs

of damage or missing parts. The finished mower

should look like Fig. A.

Cutter blade check (Fig. D)

Warning! Disconnect your mower from the

electrical supply before checking the blade.

All manufactured mowers are checked prior

to packing to ensure that the cutter blade

(23) is secure, but for your safety we would

advise you to re-check this by the following

method:

• Remove the grassbox (3 & 4).

• Turn your mower over onto its side so

that the underside of the cutter deck (1)

is exposed.

• When changing the fuse in your plug,

always ensure the fuse cover is refitted.

If the fuse cover is missing or damaged

do not use the plug.

Note: Fuses do not give personal protection

against electric shock.

Plug replacement

• Disconnect the plug from the supply.

• Cut off the plug and dispose of

immediately. Insertion of a detatched

plug into a 13 amp socket outlet may

result in electric shock.

• Only fit BS1363A approved plugs fitted

with the correctly rated fuse.

• The cable wire colours, or a letter, will be

marked at the connection points of most

good quality plugs. Attach the wires to

their respective points in the plug (see

below). Brown is for “Live” (L) and blue is

for “Neutral” (N).

• Before replacing the top cover of the

mains plug ensure that the cable restraint

is holding the outer sheath on the cable

firmly and that the two leads are correctly

fixed at the terminal screws.

Fit a

BS1363A

approved

plug

Connect blue

to N (neutral)

Make sure that the

outer sheath of the

cable is held firmly

by the clamp

Fit the

recommended

fuse

Connect brown

to L (live)

240 volts AC only.

Never use a light

socket

Warning! Never connect live or neutral wires

to the earth pin marked “E” or .

Note: Do not wire an extension cable directly

into your mower yourself. Instead, take your

mower to your nearest Black & Decker

service agent.

Increased safety can be obtained by having

a qualified electrician install a high sensitivity

(30mA) circuit breaker in the house wiring.

If you do not have such a circuit breaker

installed, or you do not wish to have one

installed, then we strongly recommend that

the electrical power to your mower be

supplied through a high sensitivity residual

current device (RCD). The RCD is designed

to provide a high degree of personal

protection against harmful electric current

should fault conditions occur.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GX530 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GX530

Black Decker GX530 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GX530 Manual

Product: