709455
9
Zoom out
Zoom in
Previous page
1/96
Next page
9
ENGLISH
(Original instructions)
u Hold the sweeper with one hand as shown in Figures H
and J and sweep from side to side with the nozzle several
inches above the ground. Slowly advance keeping the
accumulated pile of debris in front of you.
Switching on and off (Fig. H)
Warning! Do not point unit discharge at self or bystanders.
u To switch the sweeper on, depress the on/off trigger as
shown in Figure H.
u To switch the sweeper off, Release the on/off trigger as
shown in H.
POWERCOMMAND feature (Fig. I)
The POWERCOMMAND feature allows you to optimise the
tools performance and boost the power as needed.
u Switch the blower on.
u To activate the “Boost” mode, press the
POWERCOMMAND button down.
u To deactivate the “Boost” mode, press the
POWERCOMMAND button.
u Operate in “Normal” mode for most sweeping needs.
(Longer runtime will be achieved.)
u Activate “Boost” mode as needed to clear heavy or wet
debris.
Troubleshooting
Problem Possible cause Possible solution
Unit will not start. Battery not installed
properly.
Check battery
installation.
Battery not charged. Check battery
charging requirements.
Battery will not charge. Battery not inserted into
charger.
Insert battery into
charger until green
LED appears.
Charger not plugged in. Plug charger into a
working outlet. Refer
to “Important Charging
Notes” for more details.
Check current at
receptacle by plugging
in a lamp or other
appliance.
Check to see if
receptacle is
connected to a light
switch which turns
power off when you
turn out the lights.
Surrounding air
temperature too hot or
too cold.
Move charger and
tool to a surrounding
air temperature of
above 40 degree F
(4.5°C) or below 105
degree F (+40.5°C).
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Technical data
GWC54PC GWC54PCB
Input Voltage
V
DC
54 54
Speed
Km/h 160 160
Weight
kg
4.4 3.5
Battery
N476407 Bare unit (no Battery)
Voltage V
DC
54/18v
DUALVOLT
Capacity
Ah
1.5
Type
LI-Ion
Charger
90642266 Bare unit (no Charger)
Input voltage V
AC
220 - 230
Current mA 2000mA
Approx. charge
time
h
2.75
Hand/arm weighted vibration value according to
EN 50636-2-100:
= < 6,5 m/s
2
, uncertainty (K) = 1,5 m/s
2
.
L
PA
(sound pressure) 91 dB(A)
uncertainty (K) = 2,5
dB(A)
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
%
GWC54PC, GWC54PCB blower
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GWC54PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GWC54PC in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info