Manual Black Decker GW370 (page 9 of 60) (English, German, Dutch, French, Italian, Portuguese, Spanish)

527498

Zoom out

Zoom in

1/60

ENGLISH

Double insulation

This tool is double insulated; therefore no

earth wire is required. Always check that

the power supply corresponds to the

voltage on the rating plate.

Guard against electric shock.

• Electric safety can be further improved by using

a high-sensitivity (30 mA / 30 mS) residual

current device (RCD).

• Your appliance is designed for use on AC

(mains) electrical supplies only. Do not attempt

to use it on any other supply.

Plug replacement (UK only)

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the new plug.

• Connect the blue lead to the neutral terminal.

• Connect the green/yellow lead to the earth

terminal.

Warning! Follow the fitting instructions supplied with

good quality plugs. Recommended fuse: 13 A.

Extension cables

When using the appliance outdoors, only use

extension cables intended for outdoor use.

Up to 25 m of Black & Decker 1.5 mm

HO5VVF 3-core extension cable can be used

without loss of power.

Assembly prior to use (Fig. B & C)

Vacuum tube assembly (Fig. B)

• Vacuum tubes must be assembled

together before use.

• To ease assembly apply soapy water

solution to joint area.

• Align the notches (15) and the triangles

(14) on upper (4) and lower (5) tubes.

• Push the lower tube (5) firmly into the

upper tube (4), until the triangles click

into place. (Never operate apart).

• In the interests of safety, it is not

intended for the tubes to be separated

once assembled.

Blow tube assembly (Fig. C)

• Blow tube must be assembled to the

blow clamshell before use.

• Align the circles (16) on the clamshell

(6) and the tube (7).

• Push the tube (7) firmly onto the

clamshell (6) until the circles click into

place.

• For storage the blow tube can be

detached from the blow clamshell by

depressing the circles on either side

and gently sliding off the tube.

Carrying strap assembly (Fig. D - G)

• Fit the carrying strap to the powerhead,

if required, and adjust to suit the user.

For your comfort, the shoulder strap is

designed to be fitted in two ways:

Single Point Attachment (Fig. D)

• Clip the hook (17) through the eyelet

(18) on the powerhead.

• Adjust the length of the loop with the

buckle.

Double point attachment

(Fig. D, E, F & G)

• Clip the hook (17) through the eyelet

(18) on the powerhead.

• Remove the loose end of the strap from

the buckle.

• Pass the loose (19) end under the boss

(20), and thread it back through the

buckle (21).

• Adjust the length of the loop with the

buckle (Fig. G).

On/off switch (Fig. H1, H2, H3)

Warning! Use both hands to grip the

product firmly when switching on.

• For extra control, your blowvac is fitted

with a two speed switch located on the

handle of the powerhead.

• The switch has a central off. Position 0

(Fig. H1).

• To use in low speed, move the switch

fully to the rear. Position I (Fig. H2).

• To change to high speed push the

switch back to the off position and then

fully forward. Position II (Fig. H3).

Cable restraint (Fig. I)

• A cable restraint is incorporated into the

rear of the powerhead.

• Loop the cable (22) through the cable

restraint (12).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GW370 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GW370 Manual

Product: