527493
10
Zoom out
Zoom in
Previous page
1/124
Next page
10
ENGLISH
(Original instructions)
Warning! Switch off your product, allow the fan to stop and
remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Blow mode (g. H and I)
u Attach the fan cover (22) to the powerhead (11) by locat-
ing the assembly as indicated by the arrow, then pivot
about this point and press the vac release button (9) until
the catch (23) is fully engaged. (g. H)
u Align the assembled blow tube with the power head (11).
u Push the assembled blow tube onto the vacuum outlet
(25) until the lock engages tightly with the blow tube.
Warning! Never operate in Blow mode without the blow tube
and fan cover rmly in place.
u Hold the blow tube approximately 180 mm above the
ground, switch on the appliance and using a sweeping
motion from side to side, advance slowly keeping the
accumulated debris/leaves in front of you (g. I).
u Once you have blown the debris/leaves into a pile, you
can convert to vacuum mode to collect the debris.
Removing the blow tube and fan cover
u To disconnect the blow tube press the bag release button
(10) and pull the tube off, making sure that the tube does
not fall to the ground.
u To disconnect the fan cover (22) press the vac release
button (9) and pull the fan cover (22) off, making sure that
the fan cover does not fall to the ground.
Vacuum mode (g. H, J & K)
Note: For vacuuming/shredding, the collection bag (3) must
be tted.
u Remove the fan cover (22) by pressing the vac release
button (9) and pulling the fan cover (22) off, making sure
that the fan cover does not fall to the ground.
u Attach the collection bag (3) to the vacuum outlet (25) by
pressing it rmly on till it clicks into place.
u Attach the assembled vacumm tube to the powerhead (11)
by locating the assembly as indicated by the arrow, then
pivot about this point and press the vac release button (9)
until the catch is fully engaged.
u Place the strap from the collection bag over your shoulder
(g. K) this will support the additional weight as the
collection bag lls. Alternatively the collection bag can be
clipped to the support bracket (28 - g. A) on the upper
vacuum tube (4) and the strap can be tted to the power-
head (11) on the hook (29).
u Position the vacuum tube slightly above the debris/leaves.
Switch on the appliance and use a sweeping motion; the
debris/leaves will be sucked up the tube, shredded and
thrown into the collection bag (g. K).
u As the bag lls, the power of the suction will decrease,
switch off the appliance and unplug from the mains power
supply.
u Unzip the bag to empty the contents before continuing to
operate.
Warning! Never remove the collection bag without rst turning
off and unplugging the appliance.
Note: If the suction decreases and the bag is not full, the
vacuum tube is probably clogged with debris. Turn off and
unplug the vacuum and clear the tube before continuing.
Troubleshooting
Problem Possible sollution
Failure to operate Check the connection to the power supply.
Check the fuse in the plug, if blown, replace
(UK only).
Check that the blow/vacuum tube assembly is
correctly tted to the powerhead
If the fuse continues to blow - immediately
disconnect from the mains power supply and
consult your local Black & Decker authorised
repair agent.
Poor vacuum/high pitched
whine
Switch off - disconnect from the mains power
supply, debris should fall clear of the tube.
Remove and empty the collection bag.
Check that both the inlet and exit ports on the
vacuum tube are clear.
Remove any debris from the fan area.
If poor vacuuming continues - immediately
disconnect from the mains power supply and
consult your local Black & Decker authorised
repair agent.
Poor shredding
Switch off - disconnect from the mains power
supply and remove the collection bag.
Remove the vacuum tube and inspect the
fan.
Clean any debris from the fan blades.
If the fan is cracked or damaged, do not use
- consult your local Black & Decker
authorised repair agent.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GW3030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GW3030 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info