527490

Black Decker GW2610V Manual

8
Zoom out
Zoom in
Previous page
1/88
Next page
8
ENGLISH
Features
1. Carrying strap
2. Speed control knob
3. On/off switch
4. Collection bag handle
5. Collection bag
6. Blow clamshell
7. Blow tube
8. Scraper
9. Vacuum tube - lower
10. Vacuum tube - upper
11. Locking ring
12. Release button
13. Powerhead
Assembly
Warning! Before assembly, make sure that the appliance
is switched off and unplugged.
Vacuum tube assembly (fig. A)
The vacuum tubes must be assembled together before use.
Warning! Do not operate the appliance with the vacuum
tubes separated.
To ease assembly, apply a soapy water solution to the
joint area.
Align the notches (15) and the triangles (14) on the
upper (10) and lower (9) vacuum tubes.
Push the lower vacuum tube (9) firmly into the upper
vacuum tube (10) until the triangles click into place.
Warning! Do not separate the tubes once assembled.
Blow tube assembly (fig. B)
The blow tube must be assembled to the blow clamshell
before use.
Align the circles (16) on the blow clamshell (6) and the
blow tube (7).
Push the blow tube (7) firmly onto the blow clamshell (6)
until the circles click into place.
Warning! Do not separate the tubes once assembled.
Carrying strap assembly (fig. C - D)
Fit the carrying strap (1) to the appliance and adjust to suit
the user.
Clip the hook (17) through the eyelet (18).
Adjust the length of the loop with the buckle (19).
Residual risks
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These include:
Injuries caused by touching any rotating/moving parts.
Injuries caused when changing any parts, blades or
accessories.
Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods make sure you take
regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF).
Use
Switching on and off (fig. E)
Warning! Use both hands to grip the product firmly when
switching on.
To switch the appliance on, slide the on/off switch
(3) forward.
To switch the appliance off, slide the on/off switch
(3) back.
Variable speed control (fig. E)
For extra control, your blowvac is fitted with a speed
control knob (2) located on the handle of the
powerhead.
Set the variable speed control knob (2) to the required
speed range.
Cable restraint (fig. F)
A cable restraint (21) is incorporated into the rear of the
powerhead.
Loop the cable (20) through the cable restraint (21).
Using your product (fig. G)
Warning! When using as a blower or vacuum, always wear
safety glasses. If using in dusty conditions, wear a filter mask
as well.
Warning! Switch off your product, allow the fan to stop and
remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Blow mode (fig. G H and I)
Note: Make sure that the locking ring is in the unlocked
position (fig. I).
Attach the blow clamshell (6) and tube (7) to the
powerhead (13) (Fig. G) by locating the blower as
indicated by the arrow, then pivot about this point and
press the locking/release catch (12) until catch (22) is
fully engaged.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GW2610V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GW2610V in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info