586349
9
Zoom out
Zoom in
Previous page
1/120
Next page
9
ENGLISH
(Original instructions)
Features
1. On/off switch
2. Handle
3. Blow tube release button
4. Blow tube (2 pieces)
5. Vacuum tube (2 pieces)
6. Fan cover
7. Cable restraint
8. Collection bag
9. Strap
Assembly
@
Warning! Before assembly, make sure that the
appliance is switched off and unplugged.
@
Warning! Always wear protective gloves and
safety glasses when working with your blow vac.
Vacuum tube assembly (g. A)
The vacuum tubes must be assembled together before use.
u To ease assembly, apply a soapy water solution to the
joint area.
u Align the notches (10) and the tabs (11) on the lower and
upper vacuum tubes.
u Push the lower vacuum tube (5) rmly onto the upper
vacuum tube (5), until the tabs click into place.
u Insert the screw provided into the rear of the vacuum tube.
Note: Do not separate the tubes once assembled.
Blow tube assembly (g. B)
u Align the notch (12) and the tab (13) on the lower and
upper blow tubes.
u Push the lower blow tube (4) rmly onto the upper blow
tube (4) until the tab clicks into place.
Warning! Do not separate the tubes once assembled.
Use
Switching on and off (g. C)
Warning! Grip the product rmly when switching on.
u To switch the unit on, turn the on/off switch (1) clockwise
to the on position I.
u To switch the unit off, turn the on/off switch (1) anti-
clockwise to the off position 0.
Cable restraint (g. D)
A cable restraint (7) is incorporated into the rear of the
powerhead.
u Loop the cable through the cable restraint (7).
Using your product
Warning! When using as a blower or vacuum, always wear
safety glasses. If using in dusty conditions, wear a lter mask
as well.
Warning! Switch off your unit, allow the fan to stop and
remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Blow mode (g. E & F)
Warning! Never operate in blow mode without the blow tube
and fan cover rmly in place.
u Attach the blow tube (4) to the fan outlet on the power
head (g. E), push the blow tube rmly towards the unit
until the blow tube release button engages. (g. 3).
u Hold the blow tube approximately 180 mm above the
ground, switch on the unit and using a sweeping motion
from side to side, advance slowly keeping the accumu-
lated debris/leaves in front of you (g. F).
u Once you have blown the debris/leaves into a pile, you
can convert to vacuum mode to collect the debris.
Removing the blow tube
u To disconnect the blow tube (4) press the blow tube
release button (3) and pull the tube off, making sure that
the tube does not fall to the ground.
Vacuum mode (g. G, H, I & J)
Note: For vacuuming, the collection bag (8) must be tted.
u Remove blow tube (4) if attached.
u Push the collection bag (8) rmly onto the fan outlet on the
power head until the blow tube release button (3) engages
(g G).
u Unlatch the fan cover (6) from the bottom of the power
head by pressing the vacuum tube release button (14)
located near the front of the power head and pulling the
fan cover (6) open like a lid (g. H).
Note: This interlock will disconnect the electric circuit automat-
ically and the unit will not operate.
u Attach the vacuum tube (5) to the fan inlet on the power
head (g. I), insert the vacuum tube support tab (15) into
the assembly slot (g. H) on the power head.
u Push the vacuum tube towards the unit until it clicks into
place.
Note: This interlock will connect the electric circuit automati-
cally and the unit will operate.
u Place the strap from the collection bag over your shoulder
(g. J) this will support the additional weight as the collec-
tion bag lls.
u Position the vacuum tube slightly above the debris/leaves.
Switch on the unit and use a sweeping motion; the debris/
leaves will be sucked up the tube and thrown into the
collection bag (8).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GW2500 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GW2500 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info