586122

Black Decker GW250 T1 Manual

9
Zoom out
Zoom in
Previous page
1/60
Next page
9
Maintenance and storage
• Store your product in a dry place when
not in use, out of the reach of children.
• Do not use solvents or cleaning fluids to
clean your product - use a blunt
scraper to remove grass and dirt.
Always disconnect from the electrical
supply before cleaning.
• Do not operate your product if any
parts are defective; discard all defective
parts and fit new parts before use.
• Keep all nuts, bolts and screws tight to
be sure your product is in a safe
working condition.
• Use only Black & Decker recommended
replacement parts and accessories.
• Replacement fans are available from a
Black & Decker service agent.
Warning! If the supply cord is damaged,
it must be replaced by a special cord or
assembly available from an authorised
repair agent (Black & Decker part number:
372832-01 - UK only and part number:
370017-04 - Australia and New Zealand only).
The Black & Decker policy is one of continuous
improvement to their product and as such they
reserve the right to change product specification
without prior notice.
Double insulation
Your product is double insulated. This
means that all external metal parts are
electrically isolated from the power supply.
This is achieved by placing an extra
insulation barrier between the electrical and
mechanical parts. Double insulation means
greater electrical safety and obviates the
necessity of having your product earthed.
Electrical safety (UK only)
Your product should always be switched off at the
mains before disconnecting any plug and socket
connector or extension cables.
Fuse replacement
If your product is supplied with cable, fitted with a
non-re-wireable plug:
• The plug is fitted with a 13 amp fuse which is
the recommended fuse for your product.
• Only use replacement fuses which are
approved to BS1362.
• When changing the fuse in your plug, always
ensure the fuse cover is refitted. If the fuse cover
is missing or damaged do not use the plug.
Note: Fuses do not give personal protection
against electric shock.
Plug replacement
• Disconnect the plug from the supply.
• Cut off the plug and dispose of immediately.
Insertion of a detached plug into a 13 amp
socket outlet may result in electric shock.
• Only fit BS1363A approved plugs fitted with the
correctly rated fuse.
• The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their
respective points in the plug (see above).
Brown is for “Live” (L) and blue is for “Neutral”
(N).
• Before replacing the top cover of the mains
plug ensure that the cable restraint is holding the
outer sheath on the cable firmly and that the
two leads are correctly fixed at the terminal screws.
Fit a BS1363A
approved
resilient plug
Connect blue
to N (neutral)
Make sure that the
outer sheath of the
cable is held firmly
b
y
the clam
p
Fit the recommended
fuse approved
to BS1362
Connect brown
to L (live)
230 volts AC only
Never use a light
socket
Warning! Never connect live or neutral
wires to the earth pin marked “E” or .
Note: Do not wire an extension cable directly into
your machine yourself. Instead, take your product
to your nearest Black & Decker authorised repair
agent.
Increased safety can be obtained by having a
qualified electrician install a high sensitivity (30mA)
circuit breaker in the house wiring. If you do not
have such a circuit breaker installed, or you do not
wish to have one installed, then we strongly
recommend that the electrical power to the
machine be supplied through a high sensitivity
residual current device (RCD). The RCD is designed
to provide a high degree of personal protection
against harmful electric current should fault
conditions occur.
ENGLISH
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GW250 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GW250 T1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GW250 T1

Black Decker GW250 T1 User Manual - Danish, Swedish, Norwegian, Finnish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info