Manual Black Decker GW225 T1 (page 11 of 60) (English, German, Dutch, French, Italian, Portuguese, Spanish)

586121

Zoom out

Zoom in

1/60

• Position C - Minimum blow speed.

• Once you have blown the debris/leaves

into a pile, you can convert to vacuum

mode to collect the debris.

Removing blow/vacuum tube (Fig. F)

• Switch off your product and disconnect

from the mains power supply. (If in vac

mode, remove the bag).

• To disconnect the tube from the

powerhead, depress the release button

as shown (Fig. F1), ensuring the tube

does not fall to the ground.

• The release button will not depress if

on/off switch is in the forward “on”

position.

Vacuum mode (Fig. E & F)

• Ensure your product is switched off and

disconnected from the mains power

supply.

• Attach the vacuum tube in the same

way as stated previously for the GW250

blow mode (Fig. E1 & Fig. E3).

To fit the bag assembly to your product:

• Align the notches on the bag fitting with

the recesses on the vacuum outlet

(fig. F2).

• Slide the bag fitting onto the vacuum

outlet and tighten the fitting (fig. F3).

• Locate the front of the collection bag

into the clip on the underside of the

vacuum tube (Fig. F4).

• Using the nylon band locate the rear

of the collection bag over the lip

positioned at the rear of the powerhead

(Fig. F5 & Fig. F6).

• Ensure the bag zip is closed before

operation (Fig. F5).

• Position the tube slightly above the

debris/leaves. Switch your product on,

then using a sweeping motion the

debris/leaves will be sucked up the

tube, shredded and thrown into the

collection bag (Fig. F7).

• As the bag fills the power of the suction

will decrease, switch off your product and

unplug from the mains power supply.

• To remove the bag, unclip it using the

nylon handle as shown (fig. F6) and

loosen the fitting. Unzip the bag and

empty it before continuing (fig. F9).

Fitting of the blower vac wheel

(Fig. G) (K models only)

• Disconnect your product from the

electricity supply before fitting the

wheel.

Note: To be used in the vac mode only.

• Locate the wheel onto the vac tube.

Fault finding

Disconnect from the mains power supply

before attempting any maintenance.

Failure to operate (1) Check the connection to the

power supply.

(2) Check the fuse in the plug, if

blown, replace (UK only).

(3) Check that the blow/vacuum

tube assembly is correctly fitted

to the powerhead.

(4) If the fuse continues to blow -

immediately disconnect from the

mains power supply and consult

your local Black & Decker

authorised repair agent.

Poor vacuum/ (1) Switch off - disconnect from

high pitched whinethe mains power supply, debris

should fall clear of the tube.

(2) Remove and empty the

collection bag.

(3) Check that both the inlet and

exit ports on the vacuum tube

are clear.

(4) Remove any debris from the

fan area.

(5) If poor vacuuming continues -

immediately disconnect from the

mains power supply and consult

your local Black & Decker

authorised repair agent.

Poor shredding (1) Switch off - disconnect from

the mains power supply and

remove the collection bag.

(2) Remove the vacuum tube

and inspect the fan.

(3) Clean any debris from the fan

blades.

(4) If the fan is cracked or

damaged, do not use - consult

your local Black & Decker

authorised repair agent.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GW225 T1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GW225 T1

Black Decker GW225 T1 User Manual - Danish, Swedish, Norwegian, Finnish - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GW225 T1 Manual

Product: