586345
8
Zoom out
Zoom in
Previous page
1/14
Next page
4
Replacement fans are available from a
Black & Decker service agent.
!
Warning! If the supply cord is damaged, it
must be replaced by a special cord or
assembly available from Black & Decker or a
recognised service agent (Black & Decker
part number: 372832-01 - UK only and part
number: 370017-04 - Australia and New
Zealand only).
The Black & Decker policy is one of continuous
improvement to their product and as such they
reserve the right to change product specification
without prior notice.
Double insulation
Your machine is double insulated. This
means that all external metal parts are
electrically isolated from the power supply.
This is achieved by placing an extra
insulation barrier between the electrical and
mechanical parts. Double insulation means
greater electrical safety and obviates the
necessity of having the machine earthed.
Electrical safety (UK only)
Your machine should always be switched off at the
mains before disconnecting any plug and socket
connector or extension cables.
Fuse replacement
If your machine is supplied with cable, fitted with a
non-re-wireable plug:
The plug is fitted with a 13 amp fuse which is the
recommended fuse for your machine.
Only use replacement fuses which are approved
to BS1362.
When changing the fuse in your plug, always
ensure the fuse cover is refitted. If the fuse cover
is missing or damaged do not use the plug.
Note: Fuses do not give personal protection against
electric shock.
Plug replacement
Disconnect the plug from the supply.
Cut off the plug and dispose of immediately.
Insertion of a detached plug into a 13 amp
socket outlet may result in electric shock.
Only fit BS1363A approved plugs fitted with the
correctly rated fuse.
The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see above). Brown is for “Live” (L)
and blue is for “Neutral” (N).
Before replacing the top cover of the mains plug
ensure that the cable restraint is holding the
outer sheath on the cable firmly and that the two
leads are correctly fixed at the terminal screws.
Fit a
BS1363A
approved
plug
Connect blue
to N (neutral)
Make sure that the
outer sheath of the
cable is held firmly
b
y
the clam
p
Fit the
recommended
fuse
Connect brown
to L (live)
240 volts AC only.
Never use a light
socket
!
Warning! Never connect live or neutral wires
to the earth pin marked “E” or .
Note: Do not wire an extension cable directly into
your machine yourself. Instead, take your machine to
your nearest Black & Decker service centre.
Increased safety can be obtained by having a
qualified electrician install a high sensitivity (30mA)
circuit breaker in the house wiring. If you do not have
such a circuit breaker installed, or you do not wish to
have one installed, then we strongly recommend that
the electrical power to the machine be supplied
through a high sensitivity residual current device
(RCD). The RCD is designed to provide a high degree
of personal protection against harmful electric current
should fault conditions occur.
!
Warning! The use of an RCD or other circuit
breaker unit does not release the operator of
the machine from the safety instructions and
safe working practices given in this manual.
Assembly prior to use (Fig. B & F)
Vacuum tube assembly (Fig. B1)
B
Vacuum tubes must be assembled
together before use.
To ease assembly apply soapy water
solution to joint area.
Align location ribs on upper (4) and lower
(5) tubes.
Push both parts firmly together until clip
is engaged, as per moulded detail.
(Never operate apart).
In the interests of safety, it is not intended
for the tubes to be separated once
assembled.
Carrying strap assembly (GW200/GW250)
(Fig. B2)
Fit carrying strap to powerhead if
required and adjust to suit user.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GW200 T5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GW200 T5 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GW200 T5

Black Decker GW200 T5 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info