Manual Black Decker GTC800 (page 6 of 100) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

665803

Zoom out

Zoom in

1/100

ENGLISH

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Battery tool use and care

a. Rechargeonlywiththechargerspeciedbythe

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

b. Usepowertoolsonlywithspecicallydesignated

battery packs. Use of any other battery packs may create

a risk of injury and re.

c. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws, or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a re.

d. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs,ushwithwater.Ifliquidcontactseyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6. Service

a. Haveyourpowertoolservicedbyaqualiedrepair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Additional power tool safety warnings

Warning! Additional safety warnings for hedge

trimmers

u Keep all parts of the body away from the cutter blade.

Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is off

when clearing jammed material. A moment of inattention

while operating the tool can result in serious personal

injury.

u Carry the hedge trimmer by the handle with the cutter

blade stopped. When transporting or storing the

hedgetrimmeralwaystthecuttingdevicecover.

Proper handling of the hedge trimmer will reduce possible

personal injury from the cutter blades.

u Keep cable away from cutting area. During operation

the cable can be hidden in shrubs and can be accidentally

cut the handle.

u This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction

concerning use of the tool by a person responsible for

their safety. Children should be supervised to ensure that

they do not play with the tool.

u The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those

recommended in this instruction manual can present a risk

of personal injury and/or damage to property.

u Do not carry the tool with your hands on the front handle,

switch or the trigger switch unless the battery has been

removed.

u If you have not used a hedge trimmer before, preferably

seek practical instruction by an experienced user in

addition to studying this manual.

u Never touch the blades while the tool is running.

u Never attempt to force the blades to come to a standstill.

u Do not put the tool down until the blades have come to

a complete standstill.

u Regularly check the blades for damage and wear. Do not

use the tool when the blades are damaged.

u Take care to avoid hard objects (e.g. metal wire, railings)

when trimming. Should you accidentally hit any such

object, immediately switch the tool off and check for any

damage.

u Should the tool start to vibrate abnormally, immediately

switch it off and check for any damage.

u If the tool stalls, immediately switch it off. Remove the

battery before attempting to remove any obstructions.

u After use, place the blade sheath supplied over the

blades. Store the tool, making sure that the blade is not

exposed.

u Always ensure that all guards are tted when using the

tool. Never attempt to use an incomplete tool or a tool with

unauthorised modications.

u Never allow children to use the tool.

u Be aware of falling debris when cutting the higher slides of

a hedge.

u Always hold the tool with both hands and by the handles

provided.

u Check the hedge for foreign objects, e.g. wire fences.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GTC800 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GTC800 Manual

Product: