665810
9
Zoom out
Zoom in
Previous page
1/96
Next page
9
ENGLISH
(Original instructions)
u Insert two screws into the openings on the side of the
guard, tighten securely.
u Slide the bail handle (6) onto the front of the trimmer
housing behind the guard as shown in Figure F.
u Insert the remaining four screws into the openings on the
sides of the bail handle and tighten securely.
Use
Warning! Let the tool work at its own pace. Do not overload.
Switch
u To turn the unit on, push the lock off button (2) down,
squeeze the trigger (1) and depress the dual switch bail
handle (6) as shown in gure G. Once the unit is running,
you may release the lock-off button.
In order to keep the unit running you must continue to
squeeze the trigger.
u To turn the unit off, release the trigger.
Warning! Never attempt to lock a switch in the ON position.
Trimming instructions
u Maintain proper footing and balance and do not overreach.
Wear safety goggles, non-skid footwear when trimming.
u Hold the unit rmly in both hands and turn the unit ON.
u Always hold the trimmer, as shown in the illustrations in
this manual, with one hand on the switch handle and one
hand on the bail handle (gure H).
u Never hold the unit by the blade guard.
Trimming new growth (Fig. I)
u A wide, sweeping motion, feeding the blade teeth through
the twigs is most effective.
u A slight downward tilt of the blade, in the direction of mo-
tion gives the best cutting.
Warning! Do not cut stems greater than 19mm. Use the
trimmer only for cutting normal shrubbery around houses and
buildings.
Level hedges (Fig. J)
u To obtain exceptionally level hedges a piece of string can
be stretched along the length of the hedge as a guide.
Side trimming hedges (Fig. k)
u Hold the trimmer as shown and begin at the bottom and
sweep up.
POWERCOMMAND
u If you encounter a jam, depress the POWERCOMMAND
button (4) shown in Figure L. The blades will move back
and forth in a slower, more forceful rhythm to help cut
through difcult branches. Release the button to return to
normal hedge trimming usage.
Note: Once the button is released, the blades will immediately
return to full speed.
Note: The blades will stop when the button is held for 15
seconds. To reengage the POWERCOMMAND feature,
release the button and depress it again.DO NOT continuously
hold the POWERCOMMAND button during normal hedge
trimming.
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Lubrication oil is available from your BLACK+DECKER dealer
(cat. no. A6102-XJ).
Warning! Before performing any maintenance on corded/
cordless power tools:
u Switch off and unplug the appliance/tool.
u Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u Or run the battery down completely if it is integral and then
switch off.
u Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u After use, carefully clean the blades. After cleaning, apply
a lm of light machine oil to prevent the blades from
rusting.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GTC36552PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GTC36552PC in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info