Manual Black Decker GTC2451 (page 10 of 92) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

665797

Zoom out

Zoom in

1/92

ENGLISH

When charging the battery for the first time, or after

prolonged storage, it will only accept an 80% charge.

After several charge and discharge cycles, the

battery will attain full capacity. The battery may

become warm while charging; this is normal and

does not indicate a problem.

Do not charge the battery at ambient

temperatures below 4 °C or above 40 °C.

Recommended charging temperature:

approx. 24 °C.

◆ To charge the battery (6), remove it from the

tool and insert it into the charger (7).

The battery will only fit into the charger in one

way. Do not force. Be sure that the battery is

fully seated in the charger.

◆ Plug in the charger.

3 hour charger

The battery will be fully charged in approx. 3 hours.

It can be removed at any time or left in the

connected charger indefinitely.

1 hour charger

◆ Check if the red charging indicator (8) lights up.

If the green end of charge indicator (9) lights

up now instead, the battery is too hot and

cannot be charged. If this happens, remove

the battery from the charger, let the battery

cool down for approx. 1 hour and re-insert it.

After approx. 1 hour of charging, the red charging

indicator (8) will stop lighting and the green end of

charge indicator (9) will light up. The battery is

now fully charged.

◆ Remove the battery from the charger.

Switching on and off (fig. C)

For your safety, this tool is equipped with a

double switching system. This system prevents

starting the tool inadvertently and will only allow

operation while holding the tool with both hands.

Switching on

◆ Squeeze the front handle switch (1).

◆ Push the lock-off button (3) forward using your

thumb, then squeeze the trigger switch (2).

◆ Release the lock-off button.

Switching off

◆ Release the front handle switch (1) or the

trigger switch (2).

Never attempt to lock a switch in the on

position.

Hints for optimum use

◆ Slightly tilt the tool (up to 15° relative to the

line of cut) so that the blade tips point slightly

towards the hedge (fig. D1). This will cause the

blades to cut more effectively.

◆ Start by trimming the top of the hedge. Hold the

tool at the desired angle and move it steadily

along the line of cut (fig. D2). The double-sided

blade allows you to cut in either direction.

◆ In order to obtain a very straight cut, stretch a

piece of string along the length of the hedge

at the desired height. Use the string (12) as a

guideline, cutting just above it (fig. D2).

◆ In order to obtain flat sides, cut upwards with

the growth (fig. D3). Younger stems move

outwards when the blade cuts downwards,

causing shallow patches in the hedge.

◆ Take care to avoid any foreign objects.

Especially avoid hard objects such as metal

wire and railings, as these could damage the

blades (fig. D4).

◆ Regularly oil the blades.

◆ Consider purchasing a spare battery to extend

the running time of this tool. The catalogue

number of the battery is found in the technical

data chart below.

MAINTENANCE

Your Black & Decker tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Your charger does not require any maintenance

apart from regular cleaning.

◆ Before performing any maintenance on

the tool, remove the battery from

the tool.

◆ Unplug the charger before cleaning it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GTC2451 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GTC2451 Manual

Product: