665763
8
Zoom out
Zoom in
Previous page
1/88
Next page
8
ENGLISH
Regularly clean the motor housing using a clean damp
cloth. Do not use any abrasive or solvent-based
cleaner.
Make sure all switches are free of debris before
and after use.
Removing the guard (fig. B)
Warning! Remove the guard for servicing purpose only.
Always re-fit the guard after servicing.
Remove the screws (8).
Slide the guard (6) off the tool.
Troubleshooting
If the tool does not operate correctly, check the following:
Protecting the environment
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage
of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list
of authorised Black & Decker repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Technical data
Vibration total values (triax vector sum) according to
EN 60745:
Vibration emission value (a
h
) 4.6 m/s
2
,
uncertainty (K) 1.5 m/s
2
Fault Possible
cause
Action
Tool will not start Blown fuse Replace fuse
Tripped RCD Check RCD
Mains lead
disconnected
Check mains supply
Separate collection. This product must not be
disposed of with normal household waste.
GT5026
TYPE 1
GT6025
TYPE 1
GT6026
TYPE 1
GT6030
TYPE 1
GT6530
TYPE 1
GT7026
TYPE 1
GT7030
TYPE 1
Voltage Vac 230 230 230 230 230 230 230
Power input W 600 600 650 650 650 700 700
Blade strokes (no load) min-1 1400 1400 1400 1400 1400 1400 1400
Blade length cm 50 60 60 60 65 70 70
Blade gap mm26262630302630
Blade brake time s <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 <1.0
Weight (without supply cord) kg 4.5 4.75 4.75 4.75 4.8 4.9 4.9
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GT6530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GT6530 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info