Manual Black Decker GT221 (page 5 of 40) (English, German, Dutch, French, Italian, Portuguese, Spanish)

665772

Zoom out

Zoom in

1/40

Black & Decker policy is one of continuous

improvement to their product and as such they

reserve the right to change product specification

without prior notice.

Double insulation

Your machine is double insulated. This

means that all external metal parts are

electrically isolated from the power supply.

This is achieved by placing an extra

insulation barrier between the electrical and

mechanical parts. Double insulation means

greater electrical safety and obviates the

necessity of having the machine earthed.

Electrical safety (UK only)

Your machine should always be switched off

at the mains before disconnecting any plug

and socket connector or extension cables.

Fuse replacement

If your machine is supplied with cable fitted

with a non-re-wireable plug.

• The plug is fitted with a 5 amp fuse

which is the recommended fuse for

your machine.

• Only use replacement fuses which are

approved to BS1362.

• When changing the fuse in your plug,

always ensure the fuse cover is refitted.

If the fuse cover is missing or damaged

do not use the plug.

Note: Fuses do not give personal protection

against electric shock.

Plug replacement

• Disconnect the plug from the supply.

• Cut off the plug and dispose of

immediately. Insertion of a detatched

plug into a 13 amp socket outlet may

result in electric shock.

• Only fit BS1363A approved plugs fitted

with the correctly rated fuse.

Operation

• Always ensure that you work in such a

way that the cable is kept away from

the blades.

• Release switch lever to turn machine off

and remove the plug from the mains:

• Whenever you leave your machine

unattended.

• Before checking, cleaning, adjusting,

unjamming blades or working on

the machine.

• If the machine starts to vibrate

abnormally (check immediately).

• After striking a foreign object.

Inspect the machine for damage

and make repairs as necessary.

• Never attempt to stop the blades.

Always allow them to stop on their own.

• Do not put hands or feet near blades.

• Start your machine carefully according to

the instructions and with your body well

away from the blades.

• Do not use your machine in the rain and

do not allow it to get wet. Avoid using the

machine in wet conditions.

• Use your machine only in daylight or

good artificial light.

• Always be sure of your footing,

particularly on slopes and always wear

non-slip footwear.

• Walk, never run. Do not force the machine.

• Never operate the machine with

defective or missing guards or shields.

Maintenance and storage

• Store your machine in a dry place when

not in use, out of the reach of children.

• Do not use solvents or cleaning fluids to

clean your machine. Always disconnect

from the electrical supply before cleaning.

• Do not operate your machine if any parts

are defective; discard all defective parts

and fit new parts before use.

• Keep all nuts, bolts and screws tight

to be sure your machine is in a safe

working condition.

• Use only Black & Decker recommended

replacement parts and accessories.

Fit a

BS1363A

approved

plug

Connect blue

to N (neutral)

Make sure that the

outer sheath of the

cable is held firmly

by the clamp

Fit a 5 amp

fuse approved

to BS1362

Connect brown

to L (live)

Never use a

light socket

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GT221 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GT221 Manual

Product: