Manual Black Decker GS2200 (page 4 of 64) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

55610

Zoom out

Zoom in

1/64

ENGLISH

Intended use

Your Black & Decker garden shredder GS2200 has been

designed for shredding most kitchen and garden waste,

including prunings, hedge trimmings, twigs and other organic

garden waste as well as paper and cardboard. The shredded

waste is ideal for composting purposes or to obtain a smaller

volume of waste for easy disposal.

This garden shredder is intended for consumer use only. It is

intended for intermittent use: the recommended material feed

time is 40% of the total run time of the shredder. Selecting

and picking up the material will normally provide a sufficient

idle time.

Safety instructions

◆ Warning! When using mains-powered appliances, basic

safety precautions, including the following, should always

be followed to reduce the risk of fire, electric shock,

personal injury and material damage.

◆ Read all of this manual carefully before operating the

appliance.

◆ Retain this manual for future reference.

◆ Remove the plug from the socket before carrying out any

adjustment, servicing or maintenance.

Training

◆ Never allow children or persons who are unfamiliar with

this type of appliance to use it, nor anyone who has not

read this user manual.

◆ Remember that the operator is responsible for accidents

or hazards occurring to other people or their property.

Preparation

◆ Do not operate this equipment in the vicinity of bystanders.

◆ Only operate the appliance in open space (e.g. not close to

a wall or other fixed objects) and on a firm, level surface.

◆ Wear safety glasses at all times while operating the

appliance.

◆ Hearing protection should be worn whenever the sound

level seems uncomfortable.

◆ Do not wear loose clothing or jewellery, as these can be

caught in moving parts. Preferably wear rubber gloves and

non-slip footwear when working outdoors. Wear

protective hair covering to keep long hair out of the way.

◆ Do not expose the appliance to rain. Do not use the

appliance where there is a risk of causing fire or explosion,

e.g. in the presence of flammable liquids and gases.

◆ Do not operate the appliance on a paved or gravel surface

where ejected material could cause injury.

◆ To prevent damage to the cutting gear, remove earth from

roots. Do not attempt to shred bones, stone, glass, metal,

plastics or rags.

◆ Before use, carefully check the appliance and mains cable

for damage. Check for misalignment and seizure of

moving parts, breakage of parts, damage to guards and

switches and any other conditions that may affect its

operation. Ensure that the appliance will operate properly

and perform its intended function. Do not use the

appliance if any part is damaged or defective. Do not use

the appliance if the switch does not turn it on and off.

◆ Have any damaged or defective parts repaired or replaced

by an authorised repair agent. Never attempt any repairs

yourself.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified

person in order to avoid a hazard. Replace damaged or

unreadable labels.

Guard against electric shock

◆ The appliance must be connected to a socket or extension

cable containing an earth connection.

◆ Electric safety can be further improved by using a high-

sensitivity (30 mA / 30 mS) residual current device (RCD).

◆ Your appliance is designed for use on AC (mains)

electrical supplies only. Do not attempt to use it on any

other supply.

Extension cables

◆ When using the appliance outdoors, only use extension

cables intended for outdoor use.

◆ Up to 25 m of Black & Decker 1.5 mm 3-core extension

cable can be used without loss of power.

Mains supply

The product meets the technical requirements of EN 61000-3-11.

This equipment is subject to conditional connection and the

user, in consultation with the supply authority if necessary,

shall be instructed to connect it only to a supply of impedance

0.087 + j0.087 Ohm or less.

Operation

◆ Before starting the appliance, look into the feeding

chamber to make certain that it is empty.

◆ Keep your face and body away from the feed intake

opening, long branches may lash out when being pulled in

by the cutting gear. Do not allow hands or any other part

of the body or clothing inside the feeding chamber,

discharge chute, or near any moving part.

◆ Keep proper balance and footing at all times. Do not

overreach. Never stand at a higher level than the base of

the appliance when feeding material into it.

◆ Always stand clear of the discharge zone when operating

this appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GS2200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GS2200 Manual

Product: