55606
11
Zoom out
Zoom in
Previous page
1/96
Next page
11
The earth wire should be of a length to ensure
that in the event of the cable being pulled
from the plug, the earth wire is the last to
break contact.
Before replacing the top cover of the mains
plug ensure that the cable restraint (3)
is holding the outer sheath of the cable firmly
and that the leads are correctly fixed at the
terminal screws.
If the plug has a fuse cover, make sure that the
fuse cover is fitted. Do not use the plug if the
fuse cover is missing or damaged.
Never use a light socket.
Using an extension cable
Always use an approved 3-core extension cable
suitable for the power input of this tool
(see technical data). The extension cable must be
suitable for outdoor use and marked accordingly.
When using a cable reel, always unwind the cable
completely.
CARTON CONTENTS
The carton contains:
1 Shredder body with chute
4 Legs
4 Leg retaining screws
1 Allen key
1 Spanner
1 Funnel
1 Prodder
1 Crossbar
2 Sleeves
2 Bolts
2 Nuts
2 Washers
2 Wheels
1 Instruction manual
Carefully unpack all parts.
OVERVIEW (fig. A)
1. On/off switch
2. Body
3. Chute
4. Rear leg assembly
5. Front legs
6. Leg retaining screws
7. Thumb nut
8. Funnel
ASSEMBLY
Before assembly, make sure that the tool
is switched off and unplugged.
Fitting the legs (fig. B, D1 & D2)
Loosen the thumb nut (7) and remove the
chute (3) (fig. D1 & D2).
Turn the shredder upside down and place it on
the floor.
Insert the rear legs (4) into the corresponding
openings in the body (2) as shown (fig. B).
Align the screw hole (19) with the bottom of
the slot (20).
Secure each of the legs with a retaining screw (6).
Mount the wheels (16) and crossbar (17) onto
the legs, using the sleeves (13), bolts (14),
nuts (15) and washers (18) as shown.
Insert the front legs (5) into the corresponding
openings in the body (2) as shown. Align the
screw hole (19) with the bottom of the slot (20).
Secure each of the legs with a retaining screw (6).
Turn the shredder into the upright position and
refit the chute. Securely tighten the thumb nut.
Fitting the funnel (fig. D2)
Align the funnel (8) with the chute as shown.
Press the funnel down onto the chute (3) until it
snaps into place.
USE
Let the tool work at its own pace.
Do not overload.
Before starting the tool ensure that the
feed intake is empty.
Do not switch the shredder off before it
is completely empty, as it may clog and
be difficult to restart.
Remove soil and stones from plant
roots before shredding.
Firmly hold branches when feeding
them into the shredder.
ENGLISH
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GS1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GS1600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info