Manual Black Decker GS1400 (page 10 of 92) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

527512

Zoom out

Zoom in

1/92

ENGLISH

◆ The earth wire should be of a length to ensure

that in the event of the cable being pulled

from the plug, the earth wire is the last to

break contact.

◆ Before replacing the top cover of the mains

plug ensure that the cable restraint (3)

is holding the outer sheath of the cable firmly

and that the leads are correctly fixed at the

terminal screws.

◆ If the plug has a fuse cover, make sure that the

fuse cover is fitted. Do not use the plug if the

fuse cover is missing or damaged.

Never use a light socket.

Using an extension cable

Always use an approved 3-core extension cable

suitable for the power input of this tool

(see technical data). The extension cable must be

suitable for outdoor use and marked accordingly.

When using a cable reel, always unwind the cable

completely.

CARTON CONTENTS

The carton contains:

1 Shredder body with chute

3 Legs

3 Leg retaining screws

1 Allen key

1 Instruction manual

◆ Carefully unpack all parts.

OVERVIEW (fig. A)

1. On/off switch

2. Body

3. Chute

4. Rear leg

5. Front legs

6. Leg retaining screw

7. Thumb nut

ASSEMBLY

Before assembly, make sure that the tool

is switched off and unplugged.

Mounting the legs (fig. B, D1 & D2)

◆ Loosen the thumb nut (7) and remove the

chute (3) (fig. D1 & D2).

◆ Turn the shredder upside down and place it on

the floor.

◆ Insert the rear leg (4) into the corresponding

opening in the body (2) as shown. Align the

screw hole (11) with the bottom of the slot (12).

◆ Secure the leg with a retaining screw (6).

◆ Insert both front legs (5) into the

corresponding openings in the body (2) as

shown. Align the screw hole (11) with the

bottom of the slot (12).

◆ Secure each of the legs with a retaining screw (6).

◆ Turn the shredder into the upright position and

refit the chute. Securely tighten the thumb nut.

USE

◆ Let the tool work at its own pace.

Do not overload.

◆ Do not switch the shredder off before it

is completely empty, as it may clog and

be difficult to restart.

◆ Remove soil and stones from plant

roots before shredding.

◆ Firmly hold branches when feeding

them into the shredder.

Switching on and off (fig. C)

◆ To switch the tool on, set the on/off switch (1)

to position I.

◆ To switch the tool off, set the on/off switch to

position O.

Hints for optimum use

◆ Shred dry materials last, as this will help to

clear moist material from the shredder.

◆ Do not allow material to pile up and compost

prior to shredding.

◆ You may feed shreddings into the shredder for

a second time to further reduce their volume.

◆ Refer to the chart at the end of this text.

MAINTENANCE

Your Black & Decker tool has been designed to

operate over a long period of time with a

minimum of maintenance.

THE EL. MOTOR NOT START RUNIG, OR DO IT IN OPOSIT DIRECTION ? Submitted on 7-2-2024 at 11:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GS1400 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GS1400 Manual

Product: