79184
6
Zoom out
Zoom in
Previous page
1/72
Next page
6
ENGLISH
4. Shear blade (GL602/GL605)
5. Trim blade (GS721/GL605)
Assembly
Warning! Avoid accidentally switching the tool on during
assembly.
GL605 - Fitting and removing the blade (fig. A)
The shear blade (4) has been designed for trimming grass and
weeds. The trim blade (5) has been designed for trimming
hedges and shrubs.
To fit the blade, line it up with the receptacle on the tool.
Slide the blade into the receptacle and push until the
blade snaps into place.
To remove the blade, push the two release buttons (3)
simultaneously while at the same time pulling the blade
out of the receptacle.
Use
Warning! Let the tool work at its own pace. Do not overload.
Charging the battery (fig. B)
The battery needs to be charged before first use and whenever
it fails to produce sufficient power on jobs that were easily
done before. When charging the battery for the first time, or
after prolonged storage, it will only accept an 80% charge.
After several charge and discharge cycles, the battery will
attain full capacity. The battery may become warm while
charging; this is normal and does not indicate a problem.
Warning! Do not charge the battery at ambient temperatures
below 4 °C or above 40 °C. Recommended charging
temperature: approx. 24 °C.
Insert the charger plug (6) into the charger connector (7) at
the rear of the tool.
Plug the charger into a mains outlet. Switch on at the mains.
The battery can be left connected to the charger indefinitely.
When you want to use the tool, press the tab (8) to take
the charger connector from the tool and unplug the
charger.
To maximise the lifetime of the battery, it is recommended to
keep the battery connected to the charger whenever the tool
is not in use. When the battery is full, the power consumption
of the charger is negligible.
Switching on and off
Switching on
Push the lock-off button (2) backward using your thumb
and at the same time squeeze the trigger switch (1).
Release the lock-off button.
Switching off
Release the switch (1).
Warning! Never attempt to lock the switch in the on position.
Hints for optimum use
Trimming grass
In order to achieve optimum cutting results, only cut dry
grass.
Hold the tool as shown in fig. fig. C1 - C3. Keep your other
hand well away from the blade. Maintain a stable
working position so that you do not slip. Do not overreach.
When cutting long grass, work in stages from the top.
Take small cuts.
Keep the tool away from hard objects and delicate plants.
If the tool starts running slowly, reduce the load.
To make a closer cut, slightly tilt the tool.
Trimming hedges
Slightly tilt the tool (up to 15° relative to the line of cut)
so that the blade tips point slightly towards the hedge
(fig. D1). This will cause the blades to cut more effectively.
Start by trimming the top of the hedge. Hold the tool at
the desired angle and move it steadily along the line of
cut (fig. D2). The double-sided blade allows you to cut in
either direction.
In order to obtain a very straight cut, stretch a piece of
string along the length of the hedge at the desired height.
Use the string as a guideline, cutting just above it.
In order to obtain flat sides, cut upwards with the growth.
Younger stems move outwards when the blade cuts
downwards, causing shallow patches in the hedge.
Take care to avoid any foreign objects. Especially avoid
hard objects such as metal wire and railings, as these
could damage the blades.
Regularly oil the blades.
Guidelines for trimming (UK & Ireland)
Trim hedges and shrubs with seasonal leaves (new leaves
every year) in June and October.
Trim evergreens in April and August.
Trim conifers and other fast growing shrubs every six
weeks from May until October.
Guidelines for trimming (Australia & New Zealand)
Trim hedges and shrubs with seasonal leaves (new leaves
every year) in December and March.
Trim evergreens in September and February.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GS 721-QW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GS 721-QW in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info