Manual Black Decker GRC730 (page 7 of 69) (English, German, Dutch, French, Italian, Portuguese, Spanish, Spanish)

44141

Zoom out

Zoom in

1/69

• When both handles are assembled, fit

one cable clip (18) onto the upper handle

and one onto the lower handle. Clip the

cable into these ensuring the grassbox

can be removed and positioned freely.

Grassbag assembly (Fig. C)

Note: Ensure the battery is disconnected.

Read the safety instructions at the beginning

of this manual before using this accessory.

• Before starting to assemble the grassbag,

check that the parts are similar to those

shown in Fig. C1.

• Secure the grassbag by inserting the bag

rim into the channel and pushing down

firmly until the clip feature locks onto the

bag rim (inset).

• Push the support frame firmly into place.

• Assemble the two side clips to the

support frame, then assemble the

bottom clip.

Battery information

• The battery in your cordless lawnmower is a

12 volt sealed lead acid system. The battery

employs an absorbed electrolyte and, can

therefore, be stored in any position without

fear of leakage.

• The battery has been charged at the factory,

however, it will be necessary to recharge the

battery to ensure full charge before initial use.

• For optimal performance the battery should

be recharged after each use.

• For winter storage ensure:

• The mower is fully charged before storing.

• The temperature of the storage location is

below 25˚C.

• Storage duration is less than 6 months.

• Always store your mower in a dry and

cool location.

• Keep the mower and battery away from water,

heat sources (such as radiators, heaters, stoves

etc.), flames or chemicals.

Battery strap

• Locate the battery and its carrying strap.

• Fold the sides of the strap up and put the battery

in place.

• Click the straps together ensuring you locate

every hole.

• The strap should be kept on the battery at all times.

Unpacking and assembly

Your mower carton contains:

• The mower and handle assembly.

• One hardware bag containing:

• Two safety keys (24).

• Instruction literature.

• Blade nut spanner (25).

• Charger (26).

• Battery strap (27).

• One grassbag assembly (19) - see below for

assembly instructions.

Handle assembly (Fig. A & B)

Remove the contents of the carton and

familiarise yourself with the individual parts of

the mower.

The main parts of the mower shown in Fig. A

are as follows:

• Machine body (1):

• Cutter deck (2)

• Motor cover (3)

• Battery cover (4)

• Grass flap (5)

• Wheel assembly (6)

• Pivot pin (7)

• Grill (8)

• Handle (9):

• Upper handle (10)

• Lower handle (11)

• Handle knob (12)

• Switch lever (15)

• Switch box (16)

• Electric cable (17)

• Retaining clips (18)

• The lower handle (11) comes ready

assembled to the mower body.

• All that is required is to unfold the handle

by lifting it until the handle ends snap into

their locations on the sides of the mower.

Once this is complete the knobs (12) can

be tightened.

• The upper handle (10) is assembled by

fitting the bolts (13) through the holes in

the lower handle, aligning the upper

handle over these and securing with a

washer (14) and then the knob (12).

• Tighten each one with hand pressure only.

Do not use a spanner.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GRC730 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GRC730 Manual

Product: