Manual Black Decker Grasmaaier (page 9 of 88) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

34809

Zoom out

Zoom in

1/88

ENGLISH

Assembling the handle

• Place the mower with its wheels on a

firm and level surface.

• Insert the handle bars into the openings

as shown in fig. B1, so that the curve

makes them widen at the top.

• Secure each of the bars with a bolt and

shaped washer as shown. Securely

tighten the bolt using the spanner

supplied.

• Slide the cable restraint onto the

U-shaped handle below the black

switchbox.

• Place the U-shaped upper handle bar

onto the bars as shown.

• Secure the upper handle bar using the

bolts, washers and wing nuts as

shown.

• Secure the cables to the handle using

the cable clips supplied.

Do not use any tools to tighten the wing nuts.

Grassbox assembly (Fig. C)

The grassbox comes supplied in two

halves. In order to assemble proceed as

follows:

• Align the two halves of the grassbox as

shown.

• Fit the two halves together with the 5

screws, using the screwdriver supplied.

Fitting the grassbox to your mower:

• The spring loaded rear flap is lifted and

the top of the grassbox is placed over

the mounting.

• The rear flap can now be released to lock

the grassbox into position.

Removing the grassbox from your mower:

The full grassbox may be removed by raising

the grassflap, freeing the grassbox from its

mounting and resting it on the lawn. The

grassflap can be gently lowered, leaving both

hands free to lift the full grassbox.

How to use your mower (Fig. D)

Observe all of the relevant warnings when

using your mower.

We recommend the directional method of

operation to obtain the maximum cutting

performance from your mower and to

reduce the risk of the trailing extension lead

from entering the cutting path.

• Place the bulk of the supply cable on

the lawn close to the starting point.

To fix the cable to the restraint, proceed as

follows:

• Bring the socket end of the extension

cable from behind and connect it to

your mower plug.

• Form a loop on your extension cable

close to the cable restraint.

• Push the loop through the slot from the

opposite side of the restraint hook,

position the loop over the hook and pull

the cable back through the slot. Your

cable will now be restrained.

• The extension cable should now fall

away from your mower and behind the

operator, ready for use.

Warning! Do not attempt to operate your

mower with one hand - you must guide it

with both hands.

• Tilt the handle downwards to slightly raise

the front of your mower and to reduce

the risk of lawn damage whilst starting,

depress the safety lock-off button on the

switchbox and whilst still depressed pull

the switch lever towards you. Your

mower will start and you can now allow

the lock-off button to be released and

lower your mower to its proper cutting

position, and commence cutting using

both hands to guide it.

• Proceed down the cutting area as shown

in Fig. D1 (a), working from position 1

towards position 2 and, on reaching

position 2, turn to the right and proceed

towards position 3. Continue to the end

of the cutting area, turn to the left and

proceed towards position 4. Continue in

the same manner as shown in Fig. D1

(a), always working away from the cable.

Do not adopt the method as shown in

Fig. D1 (b), working towards the cable,

as this is dangerous practice.

• Ensure the cable is clear of the mower

when manoeuvering around obstructions

or when edging.

Note: Your mower has 360º rotating wheels

for maximum manoeuverability. The rear

wheels can be locked into position for

straight, accurate, cutting as follows:

•

Push the mower forwards until all the wheels

rotate towards the rear of the mower.

• Pull the locking lever on the left-hand side

of the mower until the ratchet engages.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker Grasmaaier in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker Grasmaaier Manual

Product: