586086
5
Zoom out
Zoom in
Previous page
1/60
Next page
5
ENGLISH
G
By moving the 5 position height of cut
adjuster (34) at the rear of your mower
outwards from your mower body (1) and
then up or down as required, the height of
cut can be varied to give 5 positions.
Note: The 5 position height of cut adjuster is
under tension when in the engaged position.
It has to be sprung outwards to move from
one height setting to another and will spring
back automatically into position when released.
The maximum to medium height of cut
settings, as indicated by arrows 1, 2 and 3
are suitable for coarse or overgrown grass.
Settings 4 and 5 should be used for
maintaining cultivated lawns.
Grassbag assembly (Fig. E)
Read the safety instructions at the beginning
of this manual before using this accessory.
E1
Before starting to assemble the
grassbag, check that the parts are similar
to those shown in Fig. E1.
Secure the grassbag by inserting the bag
rim into the channel and pushing down
firmly until the clip feature locks onto the
bag rim (inset).
E2
Push the support frame firmly into place.
E3
Assemble the two side clips to the
support frame, then assemble the
bottom clip.
Fitting the grassbag to your mower:
E4
Hold the grassbag top (26) by its handle.
Lift the grassflap (7), then guide the
grassbag through the lower handle tube
(10) and fix to the rear of the unit by lining
up the arrows marked on the cutter deck
(2) and grassbag top (26).
Finally, when this is complete, gently
release the grassflap (7) and it will return
to sit onto the location area of the
grassbag top (26).
How to use your mower (Fig. H & J)
!
Observe all the relevant warnings when
using your mower.
H
We recommend the directional method of
operation as shown in Fig. H to obtain the
maximum cutting performance from your
mower and to reduce the risk of the trailing
extension lead from entering the cutting path.
Place the bulk of the extension cable on
the lawn close to the starting point
(Fig. Ha, position 1).
Hold the handle assembly with both
hands.
Your switch box incorporates a cable
restraint. To fix the cable to the restraint,
proceed as follows:
Bring the socket end of the extension
cable from behind and connect it to your
mower plug.
J
Form a loop on your extension cable
close to the coupler.
Push the loop through the slot from the
opposite side of the restraint hook,
position the loop over the hook and pull
the cable back through the slot. Your
cable will now be restrained.
The extension cable should now fall
away from your mower and behind the
operator, ready for use.
!
Warning! Do not attempt to operate your
mower with one hand - you must guide it
with both hands.
Tilt the unit backwards to reduce the risk
of lawn damage whilst starting, depress
the safety lock-off button (20) on the
switchbox (24) (Fig. A), and whilst still
depressed pull the switch lever (21)
towards you. Your mower will start, and
you can now allow your mower to return
to its proper cutting position, and
commence cutting.
Proceed down the cutting area as shown
in Fig. Ha, working from position 1
towards position 2 and, on reaching
position 2, turn to the right and proceed
towards position 3. Continue to the end
of the cutting area, turn to the left, and
proceed towards position 4. Continue in
the same manner as shown in Fig. Ha,
always working away from the cable.
Do not adopt the method shown in Fig.
Hb, working towards the cable, as this
can be dangerous.
Your mower will continue to operate whilst
you are depressing the switch lever. To stop
your mower release the switch lever.
When you have finished using your mower
we recommend that you clean all debris from
it before putting it away. Refer to the “Care
and maintanence” section.
Note: To obtain the best results cut your
lawn or grassed area regularly and do not
cut when the grass is wet.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GR360 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GR360 T1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GR360 T1

Black Decker GR360 T1 Quick start guide - English - 16 pages

Black Decker GR360 T1 Quick start guide - Danish, Swedish, Norwegian, Finnish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info