529671
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
ENGLISH
Use
Warning! Let the appliance work at its own pace.
Do not overload.
Adjusting the height of cut (fig. E)
The height of cut is adjusted by changing the height of the
wheels.
Warning! Disconnect the appliance from the mains and wait
until the blade has stopped rotating before proceeding.
Release the wheels (8) by swivelling them out of the
locked position.
Set the wheels to the desired height setting.
Swivel the wheels back into the locked position, making
sure that all wheels are set to the same height.
Switching on and off
Switching on
Hold the handle with both hands and tilt it slightly
downwards to raise the front of the appliance.
Keep the lock-off button (2) depressed and pull the on/off
switch (1) towards you.
Release the lock-off button.
Let the appliance return to its working position.
Switching off
To switch the appliance off, release the on/off switch.
Warning! Never attempt to lock a switch in the on position.
Mowing (fig. F & G)
We recommend to use your mower as outlined in this section
in order to achieve optimum results and to reduce the risk of
cutting the mains cable.
Place the bulk of the mains cable on the lawn, close to
the starting point (position 1 in fig. F).
Switch the appliance on as described above.
Proceed as shown in fig. F:
Move from position 1 to position 2.
Turn right and proceed towards position 3.
Turn left and move towards position 4.
Repeat the above procedure as required.
Warning! Do not work towards the cable as shown in fig. G.
Emptying the grass bag
When you see loose grass scattering from beneath the
mower, empty the grass bag.
Warning! Never use the appliance without the grass bag.
Hints for optimum use
If the grass is longer than approx. 10 cm, make two cuts
to obtain a better finish. First mow at maximum height of
cut, then use a low or medium height of cut.
In order to achieve optimum results, only mow dry grass.
Maintenance
Your Black & Decker appliance has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
appliance care and regular cleaning.
Keep the unit clean and dry.
Regularly clean the ventilation slots with a clean,
dry paint brush.
Regularly use a blunt scraper to remove grass and dirt
from the appliance.
To clean the appliance, use only mild soap and a damp
cloth. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid. Do not use any
abrasive or solvent-based cleaner.
Blade maintenance
Regularly remove grass and dirt from the blade.
At the beginning of the gardening season, carefully
examine the condition of the blade.
If the blade is very blunt, sharpen or replace the blade.
If the blade is damaged or worn, fit a new blade as
described below.
Replacing the blade (fig. H)
A replacement blade is available from your Black & Decker
dealer.
- GR298: cat. no. A6244
- GR348: cat. no. A6245
Warning! Observe the following precautions:
Disconnect the appliance from the mains and wait until
the blade has stopped rotating before proceeding.
Be careful not to cut yourself. Use heavy-duty gloves or a
cloth to grip the blade.
Only use the specified replacement blade.
Do not remove the impeller (18) for any reason.
To replace the blade:
Turn the appliance onto its side.
Grip the blade (19) with one hand.
Use the spanner supplied to loosen and remove the blade
nut (20).
Replace the blade.
Refit the washer (if fitted before) and nut.
Securely tighten the blade nut.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GR292 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GR292 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info