529670
11
Zoom out
Zoom in
Previous page
1/84
Next page
11
ENGLISH
Switching on and off (fig. F)
Switching on
Hold the handle with both hands and tilt it
slightly downwards to raise the front of the
appliance.
Keep the lock-off button (2) depressed and
pull the on/off switch (1) towards you.
Release the lock-off button.
Let the appliance return to its working position.
Switching off
To switch the appliance off, release the on/off
switch.
Never attempt to lock a switch in the on
position.
Mowing (fig. G & H)
We recommend to use your mower as outlined in
this section in order to achieve optimum results
and to reduce the risk of cutting the mains cable.
Place the bulk of the mains cable on the lawn,
close to the starting point (position 1 in fig. G).
Switch the appliance on as described above.
Proceed as shown in fig. G:
Move from position 1 to position 2.
Turn right and proceed towards position 3.
Turn left and move towards position 4.
Repeat the above procedure as required.
Do not work towards the cable as shown
in fig. H.
Emptying the grass bag
When you see loose grass scattering from
beneath the mower, empty the grass bag.
Never use the appliance without the grass
bag.
Hints for optimum use
If the grass is longer than approx. 10 cm,
make two cuts to obtain a better finish.
First mow at maximum height of cut, then use
a low or medium height of cut.
In order to achieve optimum results, only mow
dry grass.
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Before performing any maintenance,
switch off and unplug the tool.
Regularly use a blunt scraper to remove grass
and dirt from the appliance.
Do not use any abrasive or solvent-based
cleaner.
Blade maintenance
Regularly remove grass and dirt from the blade.
At the beginning of the gardening season,
carefully examine the condition of the blade.
If the blade is very blunt, sharpen or replace
the blade.
If the blade is damaged or worn, fit a new
blade as described below.
Replacing the blade (fig. I)
A replacement blade is available from your
Black & Decker dealer (cat. no. A6182).
Disconnect the appliance from the
mains and wait until the blade has
stopped rotating before proceeding.
Be careful not to cut yourself.
Use heavy-duty gloves or a cloth to grip
the blade.
Only use the specified replacement blade.
Do not remove the impeller (21) for any
reason.
Turn the appliance onto its side.
Grip the blade (19) with one hand.
Use the spanner supplied to loosen and
remove the blade nut (20).
Replace the blade.
Refit the washer (if fitted before) and nut.
Securely tighten the blade nut.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GR280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GR280 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info