586069
10
Zoom out
Zoom in
Previous page
1/84
Next page
10
ENGLISH
The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their respective
points in the plug (see above). Brown is for
Live (L) (2), blue is for Neutral (N) (4).
Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the
leads are correctly fixed at the terminal screws.
If the plug has a fuse cover, make sure that the
fuse cover is fitted. Do not use the plug if the
fuse cover is missing or damaged.
Never use a light socket.
Using an extension cable
Always use an approved extension cable suitable
for the power input of this appliance (see rating
plate). The extension cable must be suitable for
outdoor use.
Before use, inspect the cable for signs of
damage, wear and ageing. Replace the
extension cable if damaged or defective.
When using a cable reel, always unwind the
cable completely.
OVERVIEW (fig. A)
1. On/off switch
2. Lock-off button
3. Switch box
4. Upper handle
5. Lower handle
6. Grass bag
7. Motor cover
8. Wheels
ASSEMBLY
Before assembly, make sure that the tool
is switched off and unplugged.
Assembling the handle (fig. B)
Fit the two lower handle parts (9) to the upper
handle (4) using the screws (10) and nuts (11)
as shown.
Fitting the handle (fig. C)
Insert the ends of the lower handle (5) into the
corresponding holes (12) in the mower.
Press the handle down as far as it will go.
Secure the handle using the screws (13).
Assembling and fitting the grass bag (fig. D1 - D4)
GR270/GR280/GR290
Insert the frame (14) into the bag (15) as shown
(fig. D1).
Secure the frame into the clamping rims (16)
using a spoon handle or a similar rounded tool
(fig. D2). In order to facilitate assembly, work in
the order indicated in fig. D3.
Lift the flap (17) and place the metal frame of
the grass bag into the slot (18) (fig. D4).
GR233
Align the two halves of the grass bag.
Press the two halves together.
Clip the assembled grass bag onto the mower
and let it click into place.
USE
Let the tool work at its own pace.
Do not overload.
Adjusting the height of cut (fig. E)
Disconnect the appliance from the mains
and wait until the blade has stopped
rotating before proceeding.
The height of cut is adjusted by changing the
height of the wheels.
Release the wheels (8) by swivelling them out
of the locked position.
Set the wheels to the desired height setting.
Swivel the wheels back into the locked position,
making sure that all wheels are set to the same
height.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GR270 T2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GR270 T2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info