Manual Black Decker GPC1800P TH1 (page 6 of 124) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

585844

Zoom out

Zoom in

1/124

• Do not attempt to cut a branch when the

diameter of the branch exceeds the cutting

length of the tool.

• Always remove the battery from the tool and

place the chain cover over the chain when

storing or transporting the tool.

• Keep the saw chain sharp and properly ten-

sioned. Check the tension at regular intervals.

• Switch the tool off, allow the chain to stop and

remove the battery from the tool before carrying

out any adjustment, servicing or maintenance.

• Only use genuine replacement parts and

accessories.

• Carry the pole pruner by the handle with the

cutter blade stopped. When transporting or stor-

ing the pole pruner always t the cutting device

cover and dismantle it into its component parts.

Proper handling of the pole pruner will reduce

possible personal injury and injury to others.

Residual risks

Additional residual risks may arise when using the

tool which may not be included in the enclosed

safety warnings. These risks can arise from mis-

use, prolonged use etc.

Even with the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks can not be avoided.

These include:

• Injuries caused by touching any rotating/moving

parts.

• Injuries caused when changing any parts,

blades or accessories.

• Injuries caused by prolonged use of a tool.

When using any tool for prolonged periods

ensure you take regular breaks.

• Impairment of hearing.

• Health hazards caused by breathing dust

developed when using your tool (example:-

working with wood, especially oak, beech and

MDF.)

Vibration

The declared vibration emission values stated in

the technical data and the declaration of conform-

ity have been measured in accordance with a

standard test method provided by EN 60745 and

may be used for comparing one tool with another.

The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during

actual use of the power tool can differ from

the declared value depending on the ways in

which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine

safety measures required by 2002/44/EC to protect

persons regularly using power tools in employ-

ment, an estimation of vibration exposure should

consider, the actual conditions of use and the

way the tool is used, including taking account of

all parts of the operating cycle such as the times

when the tool is switched off and when it is running

idle in addition to the trigger time.

Pruning

Before attempting to prune a tree, ensure there are

not by-laws or regulations that would prohibit or

control the felling of the tree.

• Be aware of the direction a branch may fall.

Consider all conditions that may affect the

direction of fall, including:

-the length and weight of the branch to be cut

-the intended direction of fall

-any unusual heavy limb structure or decay

-the presence of surrounding trees and

obstacles,

-including overhead lines

-the intertwinement with other branches

-the speed and direction of the wind.

• Consider access to the tree limb.

Tree branches are liable to swing towards the tree

trunk. In addition to the user, any bystander, build-

ing or object below the branch is at risk of being

struck by the branch.

Safety of others

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for the their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

Warning symbols

The following warning symbols are found on the

tool:

Warning! To reduce the risk of

injury, the user must read the

instruction manual.

ENGLISH

(Original instructions)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GPC1800P TH1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GPC1800P TH1

Black Decker GPC1800P TH1 Quick start guide - English - 16 pages

Black Decker GPC1800P TH1 User Manual - Polish - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GPC1800P TH1 Manual

Product: