583272
12
Zoom out
Zoom in
Previous page
1/48
Next page
12
ENGLISH
Setting the tool to trimming or edging mode
(fig. D, E & F)
The tool can be used in trimming mode as shown
in fig. D or in edging mode to trim overhanging
grass along lawn edges and flower beds as shown
in fig. E.
Trimming mode (fig. D & F)
For trimming, the trimmer head should be in the
position shown in fig. D. If it is not:
Turn the locking ring (7) counterclockwise.
Rotate the trimmer body counterclockwise
until the trimmer head engages in the
trimming position.
Tighten the locking ring by turning it clockwise.
Edging mode (fig. E & F)
For edging, the trimmer head should be in the
position shown in fig. E. If it is not:
Turn the locking ring (7) counterclockwise.
Rotate the trimmer body clockwise until the
trimmer head engages in the edging position.
Tighten the locking ring by turning it clockwise.
GL670/GL670P - Adjusting the position of the
secondary handle (fig. A & G)
The secondary handle can be adjusted to provide
optimum balance and comfort.
Let the guard (11) rest on the ground.
While keeping the handle button (6) depressed,
move the handle (5) into the desired position.
Release the handle button.
GL660/GL660P/GL670/GL670P -
Adjusting the height of the tool (fig. A & H)
This tool has a telescopic body, allowing you to
set it to a comfortable height.
Let the guard (11) rest on the ground.
Turn the locking ring (7) counterclockwise.
Move the switch handle up or down to the
desired height.
Tighten the locking ring by turning it clockwise.
GL670/GL670P -
Adjusting the trimmer head angle (fig. I)
The adjustable trimmer head angle allows you to
set the optimum trimming angle regardless of
your length. It also allows you to trim under
benches and shrubs.
Let the guard (11) rest on the ground.
Keeping the pedal (10) depressed with your
foot, move the switch handle up or down as
required.
Release the pedal.
Switching on and off (fig. A)
To switch the tool on, push the on/off switch (1).
To switch the tool off, release the the on/off
switch.
Never attempt to lock a switch in the on
position.
Hints for optimum use
Trimming
Hold the tool as shown in fig. D.
Gently swing the trimmer from side to side as
shown in fig. D.
When cutting long grass, work in stages from
the top. Take small cuts.
Keep the tool away from hard objects and
delicate plants.
If the tool starts running slowly, reduce the load.
Edging
Optimum cutting results are achieved on edges
deeper than 50 mm.
Do not use the tool to create edges. To create
edges, use an edging spade.
Guide the tool as shown in fig. E. Keep the
edge guide against the lawn edge.
To make a closer cut, slightly tilt the tool.
General
In order to achieve optimum cutting results,
only cut dry grass.
GL660P/GL670P - Using the plant protector (fig. J)
The plant protector will help you to protect plants
while trimming along lawn edges.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GL670P T2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GL670P T2 in the language / languages: Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GL670P T2

Black Decker GL670P T2 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info