583840

Black Decker GL653 T2 Manual

6
Zoom out
Zoom in
Previous page
1/84
Next page
6
ENGLISH
u Never touch the cutting line while the appliance is running.
u Do not put the appliance down until the cutting line has
come to a complete standstill.
u Use only the appropriate type of cutting line.
Never use metal cutting line or shing line.
u Be careful not to touch the line trimming blade.
u Take care to keep the mains cable away from the cutting
line. Always be aware of the position of the cable.
u Keep hands and feet away from the cutting line at all
times, especially when switching on the motor.
u Before using the appliance and after any impact, check for
signs of wear or damage and repair as necessary.
u Never operate the appliance with damaged guards or
without guards in place.
u Take care against injury from any device tted for trimming
the lament line length. After extending new cutter line
always return the machine to its normal operating position
before switching on.
u Always ensure that the ventilation slots are kept clear of
debris.
u Do not use the lawn trimmer (edge trimmer), if the cords
are damaged or worn.
u Keep extension cords away from cutting elements.
Labels on appliance
The following warning symbols are found on the appliance:
+
Read the manual prior to operation.
F
Wear safety glasses or goggles when operating this
appliance.
8
Keep people and animals at least 6 m away from the
cutting area.
R
Do not expose the appliance to rain or high humidity.
Electrical safety
#
This appliance is double insulated; therefore no earth
wire is required. Always check that the power supply
corresponds to the voltage on the rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Features
This tool includes some or all of the following features.
1. Trigger lever (on/off switch)
2. Handle
3. Cable restraint
4. Power inlet
5. Secondary handle
6. Adjustment button
7. Cable storage hooks
8. Motor housing
9. Guard
10. Line trimming blade
11. Spool housing
12. Cutting line
13. Edge guide
14. Tube
Assembly
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Fittingtheguard(g.A)
u Remove the screw (15) from the guard (9).
u Place the guard onto the tool as shown.
u Firmly press the guard until it snaps into place.
u Secure the guard with the screw.
Warning! Never use the tool unless the guard is properly tted.
Connectingthetooltothemains(g.B)
u Connect the female plug of a suitable extension cable to
the power inlet (4).
u Loop the cable through the cable restraint (3).
u Insert the mains plug into a mains outlet.
For wired in cable units: Make sure the cable is looped
through the cable restraint prior to connecting the plug to
the mains outlet.
Warning! The extension cable must be suitable for outdoor use.
Settingthetooltotheworkingposition(g.C)
The tool is supplied in a shipping position. The tool must be
set to a working position before use.
u Gently pull out the tube (14) until the adjustment button (6)
locks into place.
u When the button locks into place, the tool is set to the
shortest working position.
Warning! Never use the tool unless it is in a working position.
Fittingtheedgeguide(g.D)
u Position the edge guide (13) in front of the tool as shown.
u Gently pull apart the edge guide legs.
u Slide the legs over the motor housing (8) into the holes
(16) on either side.
u Make sure the edge guide ts properly into the motor
housing guides.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GL653 T2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GL653 T2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info