582932
8
Zoom out
Zoom in
Previous page
1/72
Next page
8
Warning! If the cutting line protrudes beyond the
trimming blade (7), cut it off so that it just reaches
the blade.
Winding a new cutting line onto an empty
spool ( g. G - I)
You may wind new cutting line onto an empty spool.
Replacement packs of cutting line are available from
your Black & Decker dealer (cat. no. A6170 (25 m),
A6046 (37.5 m) & A6171 (40 m).
Remove the empty spool from the tool as de-
scribed above.
Remove any remaining cutting line from the
spool.
Feed 2 cm of cutting line into one of the holes
(17) in the spool as shown.
Wind the cutting line onto the spool in the direc-
tion of the arrow (18). Make sure to wind the line
on neatly and in layers. Do not criss-cross.
Let the line protrude approximately 10 cm from
the spool and hold a nger on the line to keep
it in place.
Proceed as described above to t the spool on
the tool.
Warning! Only use the appropriate type of
Black & Decker cutting line.
Mains plug replacement (U.K. & Ireland
only)
If a new mains plug needs to be tted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in
the new plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth
terminal. Follow the tting instructions supplied with
good quality plugs. Recommended fuse: 5 A.
Troubleshooting
If your tool seems not to operate properly, follow
the instructions below. If this does not solve the
problem, please contact your local Black & Decker
repair agent.
Warning! Before proceeding, unplug the tool.
Appliance runs slowly
Check that the spool housing can rotate freely.
Carefully clean it if necessary.
Check that the cutting line does not protrude
more than 11 cm from the spool housing. If it
does, cut it off so that it just reaches the line
trimming blade.
If the bump feed does not work
Keep the tabs depressed and remove the spool
cover from the housing.
Pull the cutting line until it protrudes 11 cm from
the housing. If insuf cient cutting line is left on
the spool, install a new spool of cutting line as
instructed above.
Align the tabs on the spool cover with the cut
outs in the housing.
Push the cover onto the housing until it snaps
securely into place.
If the cutting line protrudes beyond the trimming
blade, cut it off so that it just reaches the blade.
If the bump feed still does not work or the spool is
jammed, try the following suggestions:
Carefully clean the spool cover and housing.
Remove the spool and check that the spring is
in place.
Remove the spool and unwind the cutting line,
then wind it on neatly again as described above.
Replace the spool as instructed.
Maintenance
Your Black & Decker corded/cordless appliance/tool
has been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool/
appliance care and regular cleaning.
Warning! Before performing any maintenance on
corded/ cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the ap-
pliance/ tool if the appliance/tool has a separate
battery pack.
Or run the battery down completely if it is integral
and then switch off.
Unplug the charger before cleaning it. Your
charger does not require any maintenance apart
from regular cleaning.
Regularly clean the ventilation slots in your tool/
appliance and charger using a soft brush or dry
cloth.
Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solvent-based
cleaner.
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you nd one day that your Black & Decker
product needs replacement, or if it is of no further
ENGLISH
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GL250 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GL250 T1 in the language / languages: Polish, Turkish as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GL250 T1

Black Decker GL250 T1 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info